Author Index

A

  • Abdolazizi, Sara Improvement of Corrosion Resistance of Aluminum by Application of Alumina-Zirconia Nanocomposite Coating via Sol-Gel Method [Volume 4, Issue 16, 2016, Pages 1111-1118]
  • ABDOLLAHI BAGHBAN, Sahar Study of the Sound Absorption Behavior and Cell walls Roughness of Flexible Polyurethane Foams [Volume 6, Issue 24, 2018, Pages 1733-1739]
  • Abdoos, Majid Surface modification of polypropylen nonwoven with Acrylic acid using plasma treatment and evaluation of Basic dye removal properties [Volume 4, Issue 13, 2015, Pages 911-922]
  • Abghary, Mohammad Javad Investigating physical and comfort properties of cotton and polyester fabrics coated with muscovite mineral particles [Volume 11, Issue 41, 2023, Pages 3072-3083]
  • Aboozari, Saeedeh Efficient removal of reactive black 5 dye by functionalized SBA-15 nonoporous adsorbent [Volume 2, Issue 5, 2013, Pages 337-348]
  • Adhamijamali, Arash Synthesis and Characterization of a Cellulose Acetate Based PIM for Water Treatment [Volume 6, Issue 22, 2017, Pages 1619-1626]
  • Adhamijamali, Arash Facilitated Transport for Water Treatment through a CA-based Polymer Inclusion Membrane: Synthesis & Optimization [Volume 6, Issue 24, 2018, Pages 1727-1732]
  • Adlnasab, Laleh Investigation of effective parameters in the formation of nanoporous and regular anodized aluminum oxide structures [Volume 6, Issue 21, 2017, Pages 1531-1541]
  • Afrashi, Mehran Fabrication of Polymeric Micro-Platelets via Electro-Centrifuge Spinning [Volume 6, Issue 21, 2017, Pages 1515-1524]
  • Afshar Taromi, Faramarz The assessment of photocatalytic properties of a synthesized TiO2/Ag nanocomposite particle loaded on polyester/cotton fabric via the discoloration of methylene blue [Volume 6, Issue 22, 2017, Pages 1587-1596]
  • Aghajani, Ali Physical, Mechanical and Thermal Properties of Epoxy Coatings Modified with Nitrile-Butadiene Nano-rubber [Volume 7, Issue 28, 2019, Pages 2036-2047]
  • Aghayari, Reza Evaluation Of Effectiveness Of The Artificial Neural Network For Modeling The Cyanide Ions Adsorption From Aqueous Solution Using Zno@MOF-199 Nanoadsorbent [Volume 9, Issue 36, 2021, Pages 2656-2666]
  • Aghili, Alireza Evaluation of rheological properties and shear strength of modified plastisol by nano-silica and nano-calcium carbonate using Taguchi method [Volume 10, Issue 40, 2022, Pages 2966-2977]
  • Ahamadi Azghandi, Mohammad Hosein Synthesis and characterization of MWCNT/PEG@CD nanocomposite as carrier for sustained delivery of Acyclovir [Volume 5, Issue 20, 2017, Pages 1421-1428]
  • Ahmadi, Hosein Study of hindred amine light stabilizer and UV absorber treatments for conservation of white poplar wood agent weathering [Volume 4, Issue 13, 2015, Pages 889-900]
  • Ahmadi, Hossein Assessment of heat stability of silicone oil and polyethylene glycol as lubricants of historic leathers [Volume 3, Issue 12, 2015, Pages 841-848]
  • Ahmadi, M. H. Investigation and separation of high performance oil/water emulsion with a novel nanocomposite membrane [Volume 10, Issue 40, 2022, Pages 3004-3017]
  • Ahmadi, Roya interaction of Tetryl on the Surface of nanostructure of fullerene C24 [Volume 7, Issue 28, 2019, Pages 1974-1988]
  • Ahmadi, Sina Smart coatings based on poly(styrene-spiropyran) photo-responsive polymers [Volume 9, Issue 33, 2020, Pages 2400-2407]
  • Ahmadi, Taghi The effect of color component on readability of urban advertising [Volume 8, Issue 32, 2020, Pages 2358-2368]
  • Ahmadi, Zahed Optimization of toughening of Polylactic Acid Nanocomposites/ Nanofibrillated Cellulose [Volume 7, Issue 25, 2018, Pages 1789-1798]
  • Ahmadi Azghandi, Mohammad Hossein Synthesizing of molecularly imprinted nanocomposites for using as diazinon sensor [Volume 6, Issue 21, 2017, Pages 1507-1514]
  • Ahmadi zadegan, Zahra Investigation of the effect of deposition temperature of pyrolysis spray method on superhydrophobic coatings of stearic acid modified alumina nanoparticles on stainless steel [Volume 10, Issue 38, 2021, Pages 2792-2804]
  • Ajeian, rasoul Investigation of Effective parameters on the Density of Vertically-Aligned Carbon Nanotubes Synthesized by CVD Method [Volume 2, Issue 7, 2014, Pages 463-473]
  • Akbari, Milad Fabrication of electrochemical sensor based on polyzincon nanolayer for dopamine detection [Volume 9, Issue 35, 2021, Pages 2520-2530]
  • Akbarian, maryam The Influence of nanosilver on thermal and antibacterial properties of a two component 100% solid polyurethane coating [Volume 1, Issue 4, 2013, Pages 245-252]
  • Akbari Dilmaghani, Karim Synthesis of Polymethylmetacrylate Containing of Silica Nanoparticles by Suspended in-situ Polymerization Used in Coating Industry [Volume 5, Issue 17, 2016, Pages 1187-1194]
  • Akbarzadeh, Abolfath Viscosity stabilization of Nano-Composites of PVC Plastisol in underbody coating on (PVC/Closite-30B/ZnO) [Volume 5, Issue 19, 2017, Pages 1381-1388]
  • Akhavan, Saeed Influence of the Presence of Silver Nanowires on the hardness, tribological behavior and Corrosion Properties of Aluminum Anodizing coating [Volume 8, Issue 30, 2019, Pages 2140-2150]
  • Alaei, Alireza Formation of Composite Layer Containing Silicon Carbide particles on the A106 Steel Surface by Tungsten Inert Gas (TIG) [Volume 4, Issue 14, 2015, Pages 1005-1014]
  • Alaiee, Parvaneh Synthesis of a novel dye based N-allylnaphthalimide and investigation on its optical properties as fluorescent sensor and fluoride ion colorimetry [Volume 1, Issue 1, 2012, Pages 41-48]
  • Alibakhshi, Eman Synthesis and anticorrosion properties of lithium zinc phosphate pigment [Volume 1, Issue 1, 2012, Pages 27-34]
  • Aliramezani, Reihane Influence of the Presence of Silver Nanowires on the hardness, tribological behavior and Corrosion Properties of Aluminum Anodizing coating [Volume 8, Issue 30, 2019, Pages 2140-2150]
  • Alizadeh, Mehdi Effect of NiAl- (Cr2O3, TiO2) composite coating on oxidation resistance of HH heat resistant steel [Volume 7, Issue 27, 2019, Pages 1909-1915]
  • Alizadeh, Mohamad Improving sound absorption behavior of flexible polyurethane foams infused with polymer nanofibers, carbon nanotubes and nanoparticles [Volume 8, Issue 29, 2019, Pages 2072-2080]
  • Alizadeh, Mohamad Synthesizing of smart micro/ nanocapsules containing corrosion inhibitors: A study of the parameters affecting on the capsule size [Volume 8, Issue 31, 2020, Pages 2240-2247]
  • Alizadeh, mohammad Synthesis and Characterization of Mn-Doped ZnO quantum dots utilizable in optical biosensors [Volume 1, Issue 3, 2013, Pages 213-218]
  • Alizadeh, Morteza Investigation of wear, hardness, microstructure properties and corrosion resistance of coated st52 steel by WC-Ni particles produced by tungsten -gas arc welding process [Volume 6, Issue 21, 2017, Pages 1475-1488]
  • Alizadeh, Parvin Investigation of luminescence and structural properties of oxyfluoride glass-ceramic doped with Cr2O3 and co-doping CeO2 [Volume 4, Issue 13, 2015, Pages 943-950]
  • Almasian, Arash Photocatalytic degradation of CI basic red 46 from aqueous solutions using SiO2/TiO2/Zeolite tertiary composites via advanced oxidation method [Volume 2, Issue 6, 2013, Pages 427-439]
  • Amani-Tehran, Mohammad Production of Conductive Biocompatible Nanofibrous Substrate made of PLGA/PCL/PANI [Volume 6, Issue 22, 2017, Pages 1597-1603]
  • Amani-Tehran, Mohammad Production of Conductive Nanofibrous Core–Shell Scaffolds to Regenerate Spinal Cord Injury [Volume 6, Issue 23, 2018, Pages 1681-1690]
  • Amini, Reza Surface modification of AZ31 magnesium alloy to improve the corrosion resistance via eco-friendly conversion coatings based on praseodymium rare earth element [Volume 7, Issue 25, 2018, Pages 1781-1787]
  • Amini, Reza Studying the anti-corrosive properties of a polyurethane coating on the AZ31 magnesium alloy via surface chemical modification by nano-conversion coatings based on praseodymium [Volume 6, Issue 24, 2018, Pages 1719-1726]
  • Amini, Reza Study the self-healing properties of sol-gel coatings containing reversible tetra sulfide groups [Volume 8, Issue 32, 2020, Pages 2302-2308]
  • Amiri Amraei, Iraj Synthesis and investigation of dynamic-mechanical properties of polystyrene, poly methyl methacrylate and poly buthyl acrylate IPNs with core/shell morphology [Volume 9, Issue 35, 2021, Pages 2602-2611]
  • Amiri zarandi, Ali Evaluate the effect of Thiol-capping agent on optical properties of ZnS QDs synthesized at high temperature [Volume 4, Issue 16, 2016, Pages 1169-1178]
  • Amiri Zarandi, Ali Evaluation the effect of temperature on synthesis and optical properties of nano structured Sn-based perovskite with the as a sensitizer for solar cell application [Volume 5, Issue 19, 2017, Pages 1363-1370]
  • Amiri Zarandi, Ali The Effect of Zn2+ Enrichment on the Cobalt Chromite Spinel Pigments: Synthesis, Characterization, Colorimetric and NIR Reflectance Properties [Volume 4, Issue 14, 2015, Pages 975-982]
  • Amirjan, Mostafa Rheology and stability of Al-based nanocomposite suspention and efficiency of fluizized bed coating process [Volume 3, Issue 9, 2014, Pages 615-628]
  • Amrooni Hossaini, Morteza Effects of Temperature on Corrosion Resistance of NanoZirconia-Based Conversion Coating [Volume 3, Issue 12, 2015, Pages 831-840]
  • Anbaraki, Robab Performance Analysis of Nano Composites in Marine Structural Elements [Volume 11, Issue 41, 2023, Pages 3096-3111]
  • Ansari, Fahimeh Evaluation of the effect of aging time of silane solution and dipping duration on the anticorrosion properties of silane sol-gel coating applied on stainless steel 304L [Volume 4, Issue 13, 2015, Pages 931-942]
  • Arabi, Amirmasoud Study of luminescent properties of Y2O3:Eu+3 nano particles synthesized by precipitation method in the presence of various surfactants [Volume 1, Issue 1, 2012, Pages 3-14]
  • Araghchi, Masoud Investigation of the effect of deposition temperature of pyrolysis spray method on superhydrophobic coatings of stearic acid modified alumina nanoparticles on stainless steel [Volume 10, Issue 38, 2021, Pages 2792-2804]
  • Arami, Mokhtar Application of polyamidoamine dendrimers in poly amid fibers modification to increase their dyeability [Volume 3, Issue 10, 2014, Pages 671-678]
  • Arami, Mokhtar studying of cotton fabric properties treated with prepared nanoparticles chitosan-poly(amidoamine) dendrimer (G=0.5) hybrid [Volume 3, Issue 10, 2014, Pages 701-710]
  • Arami, Mokhtar Investigation and comparison of three alpha-cellulose extraction methods from Turkmen Sahra cotton waste [Volume 3, Issue 12, 2015, Pages 861-872]
  • Arami, Mokhtar Elimination of C.I. basic violet 16 from colored textile effluent using chitosan – ethyl acrylate as a bio – adsorbent [Volume 1, Issue 1, 2012, Pages 15-26]
  • Arekhi, Marieh Investigation of water-based binders (organic-inorganic) application on mechanical properties of photocatalytic pseudo-paints [Volume 5, Issue 20, 2017, Pages 1471-1480]
  • Ariabadie, Sahar studying of cotton fabric properties treated with prepared nanoparticles chitosan-poly(amidoamine) dendrimer (G=0.5) hybrid [Volume 3, Issue 10, 2014, Pages 701-710]
  • Asadi, Jafar Synthesis and characterization polydimethyl siloxane/silica(PDMS/SiO2) hybrid acrylic copolymer as leveling agent for powder coatings [Volume 3, Issue 9, 2014, Pages 603-614]
  • Asadi, Saeid Prediction of Nano-Droplet Spreading on the Surface using the Multivariate Non-Linear Regression [Volume 7, Issue 26, 2018, Pages 1881-1886]
  • Asadian, Keyvan Comparison between microwave and conventional heating on microstructure and final properties of Al- SiC- TiC [Volume 2, Issue 5, 2013, Pages 349-356]
  • Asgari, Fatemeh Synthesize, characterization and studying the inhibitive properties of potassium zinc phosphate pigment [Volume 4, Issue 13, 2015, Pages 901-910]
  • Ashouri, M Synthesis and evaluation of photoluminescence properties of gelatin-coated PbS nanocrystals quantom dots for biomedical applications [Volume 1, Issue 4, 2013, Pages 237-244]
  • Ashraf Talesh, Seyed Siamak Synthesis, Characterization and Investigation of ZnO/GO Nanocomposite Sonophotocatalytic Properties for Degradation of Rhodamine B Dye [Volume 9, Issue 35, 2021, Pages 2532-2544]
  • Ashtariyan, Hamed Physical and Dyeing Properties of ellulosic fabric dyed by C.I. reactive dye Red 128 in the presence of Imidazoline Hydrochloride as an ionic liquid [Volume 5, Issue 17, 2016, Pages 1195-1204]
  • Ashtiani Abdi, Ali Mathematical Model to determine the electrical resistivity characteristics of composite coatings based on conductive carbon black [Volume 5, Issue 17, 2016, Pages 1239-1242]
  • Askari, Fatemeh Synthesize, Characterization and Studying the Inhibitive Properties of Potassium Zinc Phosphate (PZP) Pigments [Volume 3, Issue 12, 2015, Pages 849-860]
  • Askari, Mostafa Investigation of the magnetic and structural properties of Zinc cobalt ferrite nanoparticles CoxZn1-xFe2O4 synthesized by thermal process [Volume 5, Issue 19, 2017, Pages 1389-1397]
  • Atabaki, Fariborz Synthesis of Nitro derivatives phenyl hydrazinocarbonyl acrylic acid and their use as corrosion inhibitor agent in temporary coatings [Volume 6, Issue 23, 2018, Pages 1669-1679]
  • Ataeefard, Maryam The effects of surfactant concentration on the properties of magnetite nanoparticles used in the production of electrophotography toner via emulsion aggregation method [Volume 2, Issue 6, 2013, Pages 394-387]
  • Ataeefard, Maryam Improving thermal, flame retardant and mechanical properties of epoxy resin via expandable graphite [Volume 2, Issue 6, 2013, Pages 410-419]
  • Ataeefard, Maryam The Influence of nanosilver on thermal and antibacterial properties of a two component 100% solid polyurethane coating [Volume 1, Issue 4, 2013, Pages 245-252]
  • Atashpar, Salar Investigation on the Co-Solvent Effect on the PEDOT:PSS Inkjet Ink Formulation Before and After Printing [Volume 5, Issue 17, 2016, Pages 1215-1222]
  • Avaznejad, Farhad Making and investigating the effect of chemical pigments on the compressive, tensile, abrasion and water absorption resistance of colored concrete with an emphasis on urban beautification [Volume 10, Issue 40, 2022, Pages 3032-3047]
  • Azadfalah, Marzie Preparation, application and evaluation of properties of the black Silicon thermal control paint on 6061 aluminum surface [Volume 5, Issue 19, 2017, Pages 1331-1346]
  • Azadi, Mina Investigation on Synthesis and Applied Properties of Cellulose Acetate Butyrate Polymers (CAB) [Volume 9, Issue 33, 2020, Pages 2392-2399]
  • Azadi, nasim Hydrophobic coatings based on acrylic copolymers and the effect of adding nano silica [Volume 6, Issue 23, 2018, Pages 1655-1668]

B

  • Babaei, Bahareh Production of Electrophotographic Toner using in stiu Emulsion Copolymerization of Styrene-Butyl acrylate [Volume 9, Issue 36, 2021, Pages 2678-2688]
  • Babamiri, Aram Synthesis and characterization of water-reducible polyester-acrylate used in automotive paint industry [Volume 9, Issue 36, 2021, Pages 2632-2643]
  • Badiei, Alireza Efficient removal of reactive black 5 dye by functionalized SBA-15 nonoporous adsorbent [Volume 2, Issue 5, 2013, Pages 337-348]
  • Baghernezhad, Mina The Study of Nanostructure and Magnetic Properties of Nanocomposites Barium/Strontium Hexaferrite Synthesized by Microwave Method [Volume 7, Issue 26, 2018, Pages 1859-1869]
  • Bagherzadeh, Roohollah Hybrid Pizo-Triboelectric Energy Nanogenerator from Woollen fabric and PVDF/BaTiO3 Nanofibrous Layer [Volume 9, Issue 34, 2020, Pages 2474-2481]
  • Bahari, Ali Synthesis and investigation of the effect of precursor on hematite morphology using chemical vapor deposition layer for photoelectrochemical applications [Volume 10, Issue 39, 2022, Pages 2924-2933]
  • Bahmaei, Manocheher Investigating the Effect of Cohesive FSS of the Base Textile and Multilayer Absorbant on Microwave Absorption Properties of Electromagnetic Absorption Coating [Volume 9, Issue 33, 2020, Pages 2408-2423]
  • Bahrami, Hazhir studying of cotton fabric properties treated with prepared nanoparticles chitosan-poly(amidoamine) dendrimer (G=0.5) hybrid [Volume 3, Issue 10, 2014, Pages 701-710]
  • Bahrami, Seyed Hajir Investigation and comparison of three alpha-cellulose extraction methods from Turkmen Sahra cotton waste [Volume 3, Issue 12, 2015, Pages 861-872]
  • Bahramian, Alireza Improving the hydrophobic properties and mechanical abrasion of hybrid reinforced polyurethane coating with nanosilica-modified carbon nanotubes for use in gas pipelines [Volume 10, Issue 38, 2021, Pages 2780-2791]
  • Bakhshi, Nazanin Evalution of Replacement of zinc by Micaceous iron oxide in zinc Rich Epoxy coatings and its effect on mechanical and chemical properties. [Volume 5, Issue 17, 2016, Pages 1123-1238]
  • Bakhtiari, Abuzar Synthesis and characterization polydimethyl siloxane/silica(PDMS/SiO2) hybrid acrylic copolymer as leveling agent for powder coatings [Volume 3, Issue 9, 2014, Pages 603-614]
  • Bakhtiary, Abouzar synthesis and utilization of polysiloxane-polyether copolymer in car polish formulation [Volume 3, Issue 9, 2014, Pages 569-577]
  • Baqaei, Ali Preparation of One-dimensional Reduced Titanium Dioxide; A Candidate for photocatalytic Applications [Volume 10, Issue 39, 2022, Pages 2872-2880]
  • Barati, Abolfazl Preparation and investigation of mechanical properties of thermoplastic vulcanizate based on polypropylene/ polybutadiene rubber in the presence of acrylic acid modified polybutadiene compatibilizer [Volume 8, Issue 30, 2019, Pages 2187-2180]
  • Barati, Abolfazl Non-isothermal crystallization kinetics of thermoplastic vulcanizate based on polypropylene/ polybutadiene rubber in the presence of polybutadiene modified with acrylic acid as compatibilzer [Volume 8, Issue 31, 2020, Pages 2270-2278]
  • Barati, Zahra Preparation of tungsten-modified hematite-based photoconductors for photoelectrochemical cathodic protection of stainless steel [Volume 9, Issue 34, 2020, Pages 2482-2489]
  • Barbaz Esfahani, Reza Investigation of wear, hardness, microstructure properties and corrosion resistance of coated st52 steel by WC-Ni particles produced by tungsten -gas arc welding process [Volume 6, Issue 21, 2017, Pages 1475-1488]
  • BarbazIsfahani, Reza Prediction of elastic modulus of epoxy/single wall carbon nanotube composites by considering interfacial debonding [Volume 5, Issue 19, 2017, Pages 1371-1379]
  • Barekat, Masoud Preparation, application and evaluation of properties of the black Silicon thermal control paint on 6061 aluminum surface [Volume 5, Issue 19, 2017, Pages 1331-1346]
  • Barekat, Seyed Masoud Evaluation of Thermo-Optical Properties of Black Thermal Control Polyurethane Coating and the Effect of Atomic Oxygen on the Coating [Volume 3, Issue 11, 2015, Pages 763-776]
  • Bargozideh, Samin Investigation of photocatalytic efficiency of BiSI/BiOI/CNT composite for the Degradation of Malachite Green [Volume 9, Issue 35, 2021, Pages 2612-2621]
  • Barzegari, Mohammad Mehdi Investigation of Morphology, Electrical and Electrochemical Properties of Gold Coating on Metallic Bipolar Plates of Fuel Cells [Volume 8, Issue 32, 2020, Pages 2334-2335]
  • Bastani, Saeed preparation and characterization of vinyl and methacrylate functionalized siloxane based oligomers [Volume 3, Issue 9, 2014, Pages 579-592]
  • Bastani, Saeed Functionalization and dispersion of graphene nano plates in resins [Volume 3, Issue 12, 2015, Pages 809-830]
  • Bastani, Saeid preparation and characterixation of perflourosilane treated nanosilica and investigation of effect of pH in treatment process [Volume 1, Issue 4, 2013, Pages 253-264]
  • Behrouz, Rabi Extracting and investigating the accuracy of granulation and molecular weight of lignin based biological polyols for the production of polyurethane coating [Volume 11, Issue 44, 2024, Pages 3206-3218]
  • Beighami, Zhila Mimicking mechanical properties of human tissues with 3D printable polyurethane-based elastomeric-hydrogels [Volume 11, Issue 41, 2023, Pages 3134-3142]
  • Besharati Seidani, Abbas Fabrication and evalution of polyvinylidine fluride-barium sulfate composite coating for camouflage of target in snowy environments [Volume 3, Issue 11, 2015, Pages 753-762]
  • Besharati-Seidani, tayebe Synthesis and investigation of photochoromic behavior of bicyclic aziridine based on calix pyrrole as an intelligent molecule [Volume 1, Issue 2, 2012, Pages 41-48]
  • Bidoki, Mansour Physical and Dyeing Properties of ellulosic fabric dyed by C.I. reactive dye Red 128 in the presence of Imidazoline Hydrochloride as an ionic liquid [Volume 5, Issue 17, 2016, Pages 1195-1204]
  • Bijani, Milad Electrochemical properties and Morphology evaluation of the Lanthanum based Conversion Coating on Cold rolled steel [Volume 4, Issue 14, 2015, Pages 965-974]
  • Bolbasi, Samaneh The use of a fluorescent dye in the dyeing of wool fibers in carpet Naphthalimide [Volume 5, Issue 17, 2016, Pages 1243-1250]
  • Bonyab, ali Studying the corrosion resistance of an epoxy clay nanocoating using salt spray test and electrochemical impedance spectroscopy [Volume 1, Issue 2, 2012, Pages 3-12]
  • Boroojerdian, Parviz Synthesis and investigation of band energy variations in Pbs nanocrystallites via optical route [Volume 2, Issue 6, 2013, Pages 403-409]

C

  • Cheraghi, Mehrdad Tungstate sulfuric acid: a highly efficient catalyst in solvent-free multi-component reactions [Volume 10, Issue 40, 2022, Pages 2292-3002]
  • Chireh, Mahshid Investigation of the magnetic and structural properties of Zinc cobalt ferrite nanoparticles CoxZn1-xFe2O4 synthesized by thermal process [Volume 5, Issue 19, 2017, Pages 1389-1397]
  • Chizari, Mohammad Reza Deposition of aminopropyl trimethoxy silane on galvanized steel to improve corrosion resistance [Volume 3, Issue 11, 2015, Pages 727-732]

D

  • Dabir, Bahram Viscosity stabilization of Nano-Composites of PVC Plastisol in underbody coating on (PVC/Closite-30B/ZnO) [Volume 5, Issue 19, 2017, Pages 1381-1388]
  • Dan, Sasan Synthesis of hydrogel nanocomposite based on graft copolymer of chitosan / itaconic acid and metal nanoparticles [Volume 10, Issue 38, 2021, Pages 2772-2779]
  • Daneshmand Sharabaf, Iman Isolation of Organic Contaminants (Dyes) Using Modified Surface Sodium Zeolite: Isotherm and Bleaching Kinetics [Volume 10, Issue 39, 2022, Pages 2908-2923]
  • Darvishi, Reza Preparation and investigation of mechanical properties of thermoplastic vulcanizate based on polypropylene/ polybutadiene rubber in the presence of acrylic acid modified polybutadiene compatibilizer [Volume 8, Issue 30, 2019, Pages 2187-2180]
  • Darvishi, Reza Non-isothermal crystallization kinetics of thermoplastic vulcanizate based on polypropylene/ polybutadiene rubber in the presence of polybutadiene modified with acrylic acid as compatibilzer [Volume 8, Issue 31, 2020, Pages 2270-2278]
  • Darvishi, Reza Investigation of adsorption of copper, zinc and cadmium metals by polymeric coagulant polyaluminum chloride based on density functional theory [Volume 10, Issue 37, 2021, Pages 2740-2747]
  • Davallo, Mehran Investigation on Synthesis and Applied Properties of Cellulose Acetate Butyrate Polymers (CAB) [Volume 9, Issue 33, 2020, Pages 2392-2399]
  • Davodi, Sheida Corrosion resistance of polyaniline coatings formed by electropolymerization on titanium grade 2 [Volume 7, Issue 27, 2019, Pages 1899-1907]
  • Davoudabadi Farahani, Mohammad Investigation of the properties and applications of magnetic metal-organic framework (MMOF) composites for detection and removal of environmental pollutants [Volume 9, Issue 35, 2021, Pages 2546-2572]
  • Dehghanian, Changiz Evaluation of the effect of aging time of silane solution and dipping duration on the anticorrosion properties of silane sol-gel coating applied on stainless steel 304L [Volume 4, Issue 13, 2015, Pages 931-942]
  • Dehghanian, Changiz Comparison between constant current electrochemical and pulse current approach in reduction of graphene oxide on nickel-nickel oxide foam [Volume 7, Issue 28, 2019, Pages 2002-2008]
  • Dodangeh, mohamad A review on synthesis, properties and application of advanced naphthalimide dyes [Volume 1, Issue 2, 2012, Pages 13-30]
  • Dodangeh, Mohammad Application of polyamidoamine dendrimers in poly amid fibers modification to increase their dyeability [Volume 3, Issue 10, 2014, Pages 671-678]
  • Doostdar, Kamal Theoretical and Experimental Investigations of Nanofibers Formation on the Multiple Nozzle Electrospinning Process [Volume 3, Issue 12, 2015, Pages 799-808]

E

  • Ebadi, Mona Production of Black Electrophotographic toner via Emulsion Aggregation Method : Investigation the Effect of Agitation Speed [Volume 2, Issue 5, 2013, Pages 309-316]
  • Ebadi, Mona The effects of surfactant concentration on the properties of magnetite nanoparticles used in the production of electrophotography toner via emulsion aggregation method [Volume 2, Issue 6, 2013, Pages 394-387]
  • Ebadzade, Touraj Microwave-assisted Sintering of BaFe0.8Cu0.1Ni0.1O3-δ Composition for Use as Solid Oxide Fuel Cell Cathode [Volume 5, Issue 19, 2017, Pages 1347-1352]
  • Ebadzadeh, Touradj Potassium Sodium Niobate Lead-free Piezoelectric Ceramics: Difficulties inthe Processing and the Advantages of Iran: The Case of Iran and Slovenia [Volume 4, Issue 16, 2016, Pages 1148-1158]
  • Ebadzadeh, Touraj Sintering of alumina-mullite-zirconia composites using microwave heating [Volume 3, Issue 10, 2014, Pages 711-722]
  • Ebadzadeh, Touraj Comparison between microwave and conventional heating on microstructure and final properties of Al- SiC- TiC [Volume 2, Issue 5, 2013, Pages 349-356]
  • Ebadzadeh, Touraj Sintering of aluminum - zircon metal matrix composites [Volume 2, Issue 5, 2013, Pages 357-366]
  • Ebrahimi, Morteza Improving thermal, flame retardant and mechanical properties of epoxy resin via expandable graphite [Volume 2, Issue 6, 2013, Pages 410-419]
  • Ebrahimifar, Hadi Effect of current density on microstructure and corrosion behavior of Co-P-nano-Al2O3 composite coating [Volume 8, Issue 31, 2020, Pages 2258-2268]
  • Ebrahimifar, Hadi Investigation of the high temperature corrosion behavior of AISI 304 steel coated with Ni-Co-CeO2-ZrO2 composite [Volume 11, Issue 41, 2023, Pages 3084-3094]
  • Edraki, Milalad Evaluation of the anti-corrosion effect of clay based nanopigments modified with organic azole compounds [Volume 6, Issue 23, 2018, Pages 1641-1654]
  • Edris, Hossein Effect of NiAl- (Cr2O3, TiO2) composite coating on oxidation resistance of HH heat resistant steel [Volume 7, Issue 27, 2019, Pages 1909-1915]
  • Ehsani, Morteza Effect of surface chemical treatment on carbon steel/epoxy coating delamination [Volume 1, Issue 1, 2012, Pages 35-40]
  • Ehsani, Morteza The study of micro and nano glass flake effect on cure kinetik and anti-corrosion properties of epoxy vinyl ester composite coating [Volume 1, Issue 4, 2013, Pages 275-286]
  • Ehsani, Morteza Evaluation of simultaneous presence of epoxy and polyester resins containing silica nanoparticles in the structure of foodstuff can coatings [Volume 10, Issue 39, 2022, Pages 2882-2897]
  • Ehsani, Morteza Investigation of electrical, mechanical and thermal properties of silicone nanocomposites as electrical coating insulation [Volume 10, Issue 39, 2022, Pages 2934-2951]
  • Ehsani, Morteza Gelatin / Sodium Carboxymethylcellulose Hydrogel Microcapsules for Maximum Release of Lidocaine Hydrochloride [Volume 10, Issue 40, 2022, Pages 2952-2965]
  • Ehsani, Morteza Investigating the effect of carbon nanotubes containing carboxyl and hydroxyl functional groups on the rheological properties of water-based drilling fluid [Volume 11, Issue 44, 2024, Pages 3182-3195]
  • Eilbeigi, Salar Investigation of mechanochemical reduction of CrO3-V2O5-Mg-C composite system [Volume 7, Issue 28, 2019, Pages 1964-1973]
  • Eivaz Mohammadloo, Amin Synthesis and identification of water-reducible polyester resin curable with melamine resin and study of its anti-corrosive properties in compare with an imported commercial resin [Volume 10, Issue 37, 2021, Pages 2706-2716]
  • Eivaz Mohammadloo, hosein The Study of Corrosion Resistance Behavior of Epoxy Nano Composite on Modified Steel using Conversion Coating Based on Hexa fluorozirconic Acid [Volume 2, Issue 7, 2014, Pages 480-489]
  • Eivaz Mohammadloo, Hossein The effect of solution pH on characteristics of Hexafluorozirconic acid based conversion coating for hot dip galvanized steel [Volume 2, Issue 6, 2013, Pages 395-402]
  • Eivaz Mohammadloo, Hossein Carbon foam from Two step polymerization of Coal Tar Pitch : Synthesis and Characterization [Volume 2, Issue 5, 2013, Pages 325-336]
  • Eivaz Mohammadloo, Hossein Electrochemical properties and Morphology evaluation of the Lanthanum based Conversion Coating on Cold rolled steel [Volume 4, Issue 14, 2015, Pages 965-974]
  • Eivaz Mohammadloo, Hossein The Role of zirconium additive in modifying Hydroxyapatite-based coating to increase the anti-corrosion performance for Mg implant applications [Volume 10, Issue 40, 2022, Pages 3018-3031]
  • Enayattollahy, Shokouh Synthesis of Graphene- Poly Catechol Conductive Polymer Nanocomposite Production by Electropolymerization for use in electrochemical sensors [Volume 9, Issue 33, 2020, Pages 2380-2391]
  • Enkari, Mehdad Synthesis of Graphene- Poly Catechol Conductive Polymer Nanocomposite Production by Electropolymerization for use in electrochemical sensors [Volume 9, Issue 33, 2020, Pages 2380-2391]
  • Eqra, Rahim Electrochemical investigation of SEI layer in the formation process of natural graphite anode in Li-ion battery [Volume 7, Issue 26, 2018, Pages 1825-1832]
  • Ershad Lagroudi, Amir Structural characterization and corrosion performance of acrylic/silica nanocomposite coatings [Volume 3, Issue 9, 2014, Pages 643-652]
  • Ershad-Langroudi, Amir Study of the physical, mechanical and sound absorbing properties of polyurethane and polymethyl methacrylate interpenetrating networks [Volume 6, Issue 23, 2018, Pages 1627-1634]
  • Ershad-Langroudi, Amir Hydrophobic coatings based on acrylic copolymers and the effect of adding nano silica [Volume 6, Issue 23, 2018, Pages 1655-1668]
  • Ershad-Langroudi, Amir Optimization of nano clay content on in-situ polymerization of polyurethane/polymethyl methacrylate interpenetrating network to study acoustic, thermal and mechanical properties of nanocomposites [Volume 6, Issue 24, 2018, Pages 1747-1754]
  • Eskandari, Hossein Performance Analysis of Nano Composites in Marine Structural Elements [Volume 11, Issue 41, 2023, Pages 3096-3111]
  • Eskandari, Vahid Rapid and Easy Fabrication of Tryptophan Amino Acid Plasmonic Detection Kit [Volume 9, Issue 33, 2020, Pages 2370-2378]
  • Eslami-Farsani, Reza Effects of Temperature on Corrosion Resistance of NanoZirconia-Based Conversion Coating [Volume 3, Issue 12, 2015, Pages 831-840]
  • Eslami Shahed, Hosein Sintering of alumina-mullite-zirconia composites using microwave heating [Volume 3, Issue 10, 2014, Pages 711-722]
  • Esmaei, Shirinli Influence of the Presence of Silver Nanowires on the hardness, tribological behavior and Corrosion Properties of Aluminum Anodizing coating [Volume 8, Issue 30, 2019, Pages 2140-2150]
  • Etemadi, Sepehr Evaluation of microstructure and mechanical properties of Al-Cr/Al2O3 claddings produced by GTAW process [Volume 8, Issue 29, 2019, Pages 2048-2059]
  • Etezad, Masoud Investigating the printability of enzyme deinking electrophotograpic printed paper [Volume 8, Issue 29, 2019, Pages 2082-2091]

F

  • Fadai, Sepideh Fabrication of Polymeric Micro-Platelets via Electro-Centrifuge Spinning [Volume 6, Issue 21, 2017, Pages 1515-1524]
  • Fakhrali, Aref Synthesis and Characterization of Polyacrylamideoxime and Its Nanofibers as Self-Decontamination Coatings [Volume 4, Issue 14, 2015, Pages 1015-1022]
  • Farahi, Mahnaz Tungstate sulfuric acid: a highly efficient catalyst in solvent-free multi-component reactions [Volume 10, Issue 40, 2022, Pages 2292-3002]
  • Farhadnejad, Hassan Preparation of Antistatic Organic-Inorganic Nanocomposite Coatings Based on Epoxy-Silane Containing ITO Nanoparticles [Volume 4, Issue 16, 2016, Pages 1119-1128]
  • Farkhonde Kalam, Morteza Homogenous synthesis of hydrophilic silver nanoparticle by chemical reduction and surface modification by oleic acid [Volume 3, Issue 10, 2014, Pages 665-670]
  • Farokhi, Mehdi Evaluating the effect of albumin protein coating on corona composition of single walled carbon nanotubes [Volume 8, Issue 29, 2019, Pages 2060-2071]
  • Farrokhi, Mohammad Self-Stratifying Metallic Coating Formulation Based on Polyurethane using Taguchi Experimental Design Method [Volume 9, Issue 34, 2020, Pages 2490-2500]
  • Farzi, GholamAli Homogenous synthesis of hydrophilic silver nanoparticle by chemical reduction and surface modification by oleic acid [Volume 3, Issue 10, 2014, Pages 665-670]
  • Fazaeli, Reza Influences of Inorganic Coatings on Corrosion Resistance of Invar Alloy [Volume 4, Issue 14, 2015, Pages 991-998]
  • Fazayel, Azadeh Sadat The effect of different types of functional groups on the fluidity of the polycarboxylate superplasticizers in the presence of various cations [Volume 6, Issue 22, 2017, Pages 1605-1617]
  • Feizpour, Mahdi Potassium Sodium Niobate Lead-free Piezoelectric Ceramics: Difficulties inthe Processing and the Advantages of Iran: The Case of Iran and Slovenia [Volume 4, Issue 16, 2016, Pages 1148-1158]
  • Ferdowsi, parnian Preparation, characterization and optical properties of PVA/CdS nanocomposite thin films obtained by electrospinning method [Volume 2, Issue 6, 2013, Pages 386-379]
  • Forootan, Hamed Evaluation of Cerium conversion Coating Parameters on Strength and Adhesion Properties of Optimized Epoxy Adhesives containing Butadiene Elastomers and Graphene Oxide Particles [Volume 9, Issue 33, 2020, Pages 2434-2450]

G

  • Ganjaee, morteza Surface modification of AZ31 magnesium alloy to improve the corrosion resistance via eco-friendly conversion coatings based on praseodymium rare earth element [Volume 7, Issue 25, 2018, Pages 1781-1787]
  • Ganjaei Sari, Morteza Studying the anti-corrosive properties of a polyurethane coating on the AZ31 magnesium alloy via surface chemical modification by nano-conversion coatings based on praseodymium [Volume 6, Issue 24, 2018, Pages 1719-1726]
  • Ganjali, MohammadReza Efficient removal of reactive black 5 dye by functionalized SBA-15 nonoporous adsorbent [Volume 2, Issue 5, 2013, Pages 337-348]
  • Garmaby, Hamid Optimization of toughening of Polylactic Acid Nanocomposites/ Nanofibrillated Cellulose [Volume 7, Issue 25, 2018, Pages 1789-1798]
  • Ghadimi, Mojtaba Investigation of Morphology, Electrical and Electrochemical Properties of Gold Coating on Metallic Bipolar Plates of Fuel Cells [Volume 8, Issue 32, 2020, Pages 2334-2335]
  • Ghadimi Chermahini, Rahmatollah Investigating on coating morphology and chemical composition of AL-A380 and AL-B390 coated by anodic oxidation method [Volume 3, Issue 10, 2014, Pages 679-686]
  • Ghadimi Herfeh, Faezeh Preparation of Antistatic Organic-Inorganic Nanocomposite Coatings Based on Epoxy-Silane Containing ITO Nanoparticles [Volume 4, Issue 16, 2016, Pages 1119-1128]
  • Ghaedi, M. Investigation and separation of high performance oil/water emulsion with a novel nanocomposite membrane [Volume 10, Issue 40, 2022, Pages 3004-3017]
  • Ghaffari, Mehdi Effect of surface chemical treatment on carbon steel/epoxy coating delamination [Volume 1, Issue 1, 2012, Pages 35-40]
  • Ghaffarian, Seyed Reza Carbon foam from Two step polymerization of Coal Tar Pitch : Synthesis and Characterization [Volume 2, Issue 5, 2013, Pages 325-336]
  • Ghaffarian, Seyed Reza Evalution of various parameters in synthesis of PNS [Volume 7, Issue 28, 2019, Pages 1990-2001]
  • Ghaffarian, Seyyed Reza Synthesis of leather fatliquoring agent with using castor oil/metallic organic frameworks (MOFs) via Pickering emulsion polymerization [Volume 6, Issue 21, 2017, Pages 1543-1549]
  • Ghahari, Mehdi Study on the effect of photocatalytic benzene elimination reaction on the tensile strength of water-based acrylic paint [Volume 4, Issue 15, 2016, Pages 1059-1068]
  • Ghahari, Mehdi Study of luminescent properties of Y2O3:Eu+3 nano particles synthesized by precipitation method in the presence of various surfactants [Volume 1, Issue 1, 2012, Pages 3-14]
  • Ghaieni, Hamidreza Impact strength increasing and toughening mechanism of epoxy resin [Volume 3, Issue 12, 2015, Pages 873-884]
  • Ghalami Choubar, Bahram Synthesizing of molecularly imprinted nanocomposites for using as diazinon sensor [Volume 6, Issue 21, 2017, Pages 1507-1514]
  • Ghamgosar, Ozra Application of Cactus on Textiles as a Shielding Agent against Electromagnetic Waves [Volume 10, Issue 39, 2022, Pages 2898-2907]
  • Ghanbari, Davood The Study of Nanostructure and Magnetic Properties of Nanocomposites Barium/Strontium Hexaferrite Synthesized by Microwave Method [Volume 7, Issue 26, 2018, Pages 1859-1869]
  • Ghanbari, Davood The Study of Nanostructure, Magnetic Properties and Photocatalytic Behavior of Fe3O4/Ag Nanocomposites Synthesized by Microwave Method [Volume 9, Issue 34, 2020, Pages 2462-2473]
  • Ghanbari, Firuz Mathematical Model to determine the electrical resistivity characteristics of composite coatings based on conductive carbon black [Volume 5, Issue 17, 2016, Pages 1239-1242]
  • Ghanbari Alanegh, Hosein Enhancement of Hydrophilicity in Poly-lactic Glycolic Acid Electrospun Nanofibrous Web [Volume 5, Issue 20, 2017, Pages 1429-1437]
  • Ghanbarzadeh, bahareh Investigating the printability of enzyme deinking electrophotograpic printed paper [Volume 8, Issue 29, 2019, Pages 2082-2091]
  • Ghani, Kamal Preparation of protective coating based on POSS- nanocage for space solar cells and evaluation of its stability in thermal cycling [Volume 4, Issue 16, 2016, Pages 1159-1168]
  • Gharanjig, K The synthesis of two newdyes based on indoline and the investigation of their photovotalic properties [Volume 2, Issue 6, 2013, Pages 420-426]
  • Gharanjig, Kamal Optical brigheners based on stilbenes : Synthesis , structure and functional groups effects on fluorescence emission [Volume 2, Issue 5, 2013, Pages 317-324]
  • Gharanjig, Kamaladin Study on photovoltaic properties of dye-sensitized solar cells based on indigo dyes in the presence of an anti-aggregation agent [Volume 4, Issue 16, 2016, Pages 1105-1110]
  • Gharanjig, Kamaladin Kinetic study of ß-carotene degradation in nanostructured lipid carriers [Volume 8, Issue 29, 2019, Pages 2108-2115]
  • Gharanjig, Kamaledin The use of a fluorescent dye in the dyeing of wool fibers in carpet Naphthalimide [Volume 5, Issue 17, 2016, Pages 1243-1250]
  • Gharanjig, Kamaledin A review on synthesis, properties and application of advanced naphthalimide dyes [Volume 1, Issue 2, 2012, Pages 13-30]
  • Gharanjig, Kamaledin Synthesis of benzoxanthene-3,4-carboxilic anhydride and application in dye-sensitized solar cell [Volume 7, Issue 27, 2019, Pages 1887-1897]
  • Gharanjig, Kamalodin Application of polyamidoamine dendrimers in poly amid fibers modification to increase their dyeability [Volume 3, Issue 10, 2014, Pages 671-678]
  • Gharanjik, Kamalodin Functionalization and dispersion of graphene nano plates in resins [Volume 3, Issue 12, 2015, Pages 809-830]
  • Ghasali, Ehsan Comparison between the effects of microwave and conventional sintering on the microstructure and mechanical properties of metal-base Al-WC composites [Volume 4, Issue 15, 2016, Pages 1081-1086]
  • Ghasali, Ehsan Comparison between microwave and conventional heating on microstructure and final properties of Al- SiC- TiC [Volume 2, Issue 5, 2013, Pages 349-356]
  • Ghasali, Ehssan Sintering of aluminum - zircon metal matrix composites [Volume 2, Issue 5, 2013, Pages 357-366]
  • Ghasemi, Ebrahim Synthesize, characterization and studying the inhibitive properties of potassium zinc phosphate pigment [Volume 4, Issue 13, 2015, Pages 901-910]
  • Ghasemi, Ebrahim The effects of surfactant concentration on the properties of magnetite nanoparticles used in the production of electrophotography toner via emulsion aggregation method [Volume 2, Issue 6, 2013, Pages 394-387]
  • Ghasemi, Ebrahim Synthesize, Characterization and Studying the Inhibitive Properties of Potassium Zinc Phosphate (PZP) Pigments [Volume 3, Issue 12, 2015, Pages 849-860]
  • Ghasemi, Ebrahim Synthesis and anticorrosion properties of lithium zinc phosphate pigment [Volume 1, Issue 1, 2012, Pages 27-34]
  • Ghasemi, Nahid Evaluation Of Effectiveness Of The Artificial Neural Network For Modeling The Cyanide Ions Adsorption From Aqueous Solution Using Zno@MOF-199 Nanoadsorbent [Volume 9, Issue 36, 2021, Pages 2656-2666]
  • Ghasemi Amineh, Ahmadreza Properties and applications of hydrogels in medicine: A review [Volume 8, Issue 29, 2019, Pages 2116-2128]
  • Ghasemi Hejran Doost, Reza Evaluation of Effective Parameters on Rheological and Mechanical Properties of Automotive Plastisol Coatings Reinforced with Nano Silica Using Taguchi Method [Volume 7, Issue 27, 2019, Pages 1925-1936]
  • Ghayeb, Yousef Preparation of tungsten-modified hematite-based photoconductors for photoelectrochemical cathodic protection of stainless steel [Volume 9, Issue 34, 2020, Pages 2482-2489]
  • Gholipour Shahraki, Mehran Molecular dynamics simulation of the effect of size, crystallite shape, and defect on oxygen diffusion in SrTiO3 [Volume 7, Issue 26, 2018, Pages 1843-1850]
  • Golshan, Mahmoud Reza Making and investigating the effect of chemical pigments on the compressive, tensile, abrasion and water absorption resistance of colored concrete with an emphasis on urban beautification [Volume 10, Issue 40, 2022, Pages 3032-3047]
  • Goodarzi, Mojtaba Study of photocatalytic properties of electrodeposited silver and zinc oxide thin films [Volume 10, Issue 37, 2021, Pages 2730-2738]
  • Gorji Kandi, Saeedeh Synthesis and characterization of water-reducible polyester-acrylate used in automotive paint industry [Volume 9, Issue 36, 2021, Pages 2632-2643]

H

  • Haji, Aminodin Surface modification of polypropylen nonwoven with Acrylic acid using plasma treatment and evaluation of Basic dye removal properties [Volume 4, Issue 13, 2015, Pages 911-922]
  • Hajiaghababaei, Leila Efficient removal of reactive black 5 dye by functionalized SBA-15 nonoporous adsorbent [Volume 2, Issue 5, 2013, Pages 337-348]
  • Hajiahmadi, Arezoo An overview of the methods of synthesis, characterization and applications of MXene as a Microwave absorber [Volume 11, Issue 41, 2023, Pages 3048-3071]
  • Hamadanian, Masood Using of Artemesia Absinthinum, Verbascum Thapsus, Viola Odorata, Matricaria Chamomilla and Corianderum Satirum natural dyes in making dye-sensitized solar cells [Volume 8, Issue 32, 2020, Pages 2346-2356]
  • Hamadanian, Masoud Properties of MXene and its synthesis methods [Volume 12, Issue 45, 2023, Pages 1-22]
  • Hamidinezhad, Habib Fabrication of SiO2 and SnO2 composite nanofibers in order to increase the photocatalytic degradation under ultraviolet light. [Volume 11, Issue 41, 2023, Pages 3112-3123]
  • Hamidi pasand, Vahid Improving the hydrophobic properties and mechanical abrasion of hybrid reinforced polyurethane coating with nanosilica-modified carbon nanotubes for use in gas pipelines [Volume 10, Issue 38, 2021, Pages 2780-2791]
  • Hanifeh, Effat Evaluation the effect of temperature on synthesis and optical properties of nano structured Sn-based perovskite with the as a sensitizer for solar cell application [Volume 5, Issue 19, 2017, Pages 1363-1370]
  • Hannula, Simo-Pekka Synthesis and characterization of CuSbS2 nanocrystals via hot injection route and investigation of sulfur precursor source [Volume 5, Issue 20, 2017, Pages 1415-1420]
  • Hasani Ramedani, Saeed Enhanced hydrogen sulfide adsorption of polyurethane nanofibrous membranes using carbon nanotubes decorated with metal oxide nanoparticles [Volume 8, Issue 30, 2019, Pages 2130-2138]
  • Hasankhani, Homa Preparation and study the structure of cellulosic nanofibers treated with β-cyclodextrin for gradual drug release [Volume 5, Issue 17, 2016, Pages 1205-1214]
  • Hasanzadeh, Mahdi Improving sound absorption behavior of flexible polyurethane foams infused with polymer nanofibers, carbon nanotubes and nanoparticles [Volume 8, Issue 29, 2019, Pages 2072-2080]
  • Hasanzadeh, Mahdi Enhanced hydrogen sulfide adsorption of polyurethane nanofibrous membranes using carbon nanotubes decorated with metal oxide nanoparticles [Volume 8, Issue 30, 2019, Pages 2130-2138]
  • Hasanzadeh, Mahdi Synthesis of Porous Zirconium-based Metal-Organic Framework Nanostructure for Detoxification of Chemical Pollutants [Volume 9, Issue 34, 2020, Pages 2452-2460]
  • Hasanzadeh, Mahdi Investigation of the properties and applications of magnetic metal-organic framework (MMOF) composites for detection and removal of environmental pollutants [Volume 9, Issue 35, 2021, Pages 2546-2572]
  • Hasanzadeh, Mahdi Improving waterproof and breathability of nanofibrous polyurethane-poly(vinylidene fluoride) hybrid membrane [Volume 9, Issue 36, 2021, Pages 2622-2630]
  • Hasanzadeh, Mahdi Air pollution remediation using nanofibrous filters based on metal-organic frameworks (MOFs) prepared through electrospinning [Volume 10, Issue 37, 2021, Pages 2690-2704]
  • Hasanzadeh, Mahdi Fabrication and characterization of hemostatic wound dressing based on chitosan/tannic acid/zeolitic imidazole framework (ZIF-8) composite nanofibers [Volume 10, Issue 38, 2021, Pages 2806-2815]
  • Hasanzadeh, Mahdi Investigating physical and comfort properties of cotton and polyester fabrics coated with muscovite mineral particles [Volume 11, Issue 41, 2023, Pages 3072-3083]
  • Hashemi Daryan, Sahar The Effect of Citrate on the Morphology of Hydroxyapatite particles through Hydrothermal Synthesis [Volume 7, Issue 27, 2019, Pages 1955-1962]
  • Hasheminasab, roya Evaluation of Additive and Filler Effects on Water-based Traffic Nanocomposite Coatings [Volume 2, Issue 7, 2014, Pages 445-454]
  • Hassani Khorshidi, Fatemeh Extracting and investigating the accuracy of granulation and molecular weight of lignin based biological polyols for the production of polyurethane coating [Volume 11, Issue 44, 2024, Pages 3206-3218]
  • Hassanzadeh Tabrizi, S.A. Corrosion resistance of polyaniline coatings formed by electropolymerization on titanium grade 2 [Volume 7, Issue 27, 2019, Pages 1899-1907]
  • Hassanzadeh Tabrizi, S.A. Investigation of mechanochemical reduction of CrO3-V2O5-Mg-C composite system [Volume 7, Issue 28, 2019, Pages 1964-1973]
  • Hassanzadeh Tabrizi, S.A. Facile synthesis and investigation of Co3O4-ZnO-Ag nanocomposites as efficient photocatalysts for decomposition of direct yellow dye [Volume 8, Issue 30, 2019, Pages 2166-2179]
  • Hassanzadeh Tabrizi, S.A. The effects of Ag nanoparticles deposition on the photocatalytic activity of C3N4 for the degradation of tetracycline [Volume 9, Issue 36, 2021, Pages 2644-2654]
  • Hatami, Somaieh Performance Analysis of Nano Composites in Marine Structural Elements [Volume 11, Issue 41, 2023, Pages 3096-3111]
  • Hedayati, Hamidreza Evaluate the effect of Thiol-capping agent on optical properties of ZnS QDs synthesized at high temperature [Volume 4, Issue 16, 2016, Pages 1169-1178]
  • Hedayati, Hamid Reza The Effect of Zn2+ Enrichment on the Cobalt Chromite Spinel Pigments: Synthesis, Characterization, Colorimetric and NIR Reflectance Properties [Volume 4, Issue 14, 2015, Pages 975-982]
  • Hedayati, Kambiz Study of photocatalytic properties of electrodeposited silver and zinc oxide thin films [Volume 10, Issue 37, 2021, Pages 2730-2738]
  • Heidari, Amin Development of a new method to evaluate chain entanglements density in low entangled UHMWPE and UHMWPE/Graphene nanocomposites [Volume 5, Issue 20, 2017, Pages 1439-1447]
  • Heidari, Gholamreza Synthesis of Cu2O-CuO two layer as photocathode and investigation of its photoelectrochemical properties [Volume 8, Issue 32, 2020, Pages 2310-2318]
  • Hejri, Abdolrasoul Kinetic study of ß-carotene degradation in nanostructured lipid carriers [Volume 8, Issue 29, 2019, Pages 2108-2115]
  • Hivechi, Ahmad Investigation and comparison of three alpha-cellulose extraction methods from Turkmen Sahra cotton waste [Volume 3, Issue 12, 2015, Pages 861-872]
  • Hosseini, hasan Enhanced hydrogen sulfide adsorption of polyurethane nanofibrous membranes using carbon nanotubes decorated with metal oxide nanoparticles [Volume 8, Issue 30, 2019, Pages 2130-2138]
  • Hosseini, Hooman Carbon foam from Two step polymerization of Coal Tar Pitch : Synthesis and Characterization [Volume 2, Issue 5, 2013, Pages 325-336]
  • Hosseini, Mina Investigation and separation of high performance oil/water emulsion with a novel nanocomposite membrane [Volume 10, Issue 40, 2022, Pages 3004-3017]
  • Hosseini, Seyyedeh Fatemeh An overview of the methods of synthesis, characterization and applications of MXene as a Microwave absorber [Volume 11, Issue 41, 2023, Pages 3048-3071]
  • Hosseini Darabi, Negar Analysis the effect of different cross-linking agents on the structure of Starch-Poly (vinyl) alcohol nanofiber mats produced by electrospinning method [Volume 10, Issue 40, 2022, Pages 2978-2990]
  • Hosseini Ravandi, Abdolkarim Fabrication of Polymeric Micro-Platelets via Electro-Centrifuge Spinning [Volume 6, Issue 21, 2017, Pages 1515-1524]
  • Hosseini-Zori, Maryam Improvement of Corrosion Resistance of Aluminum by Application of Alumina-Zirconia Nanocomposite Coating via Sol-Gel Method [Volume 4, Issue 16, 2016, Pages 1111-1118]
  • Hosseinnezhad, Mozhgan Study on photovoltaic properties of dye-sensitized solar cells based on indigo dyes in the presence of an anti-aggregation agent [Volume 4, Issue 16, 2016, Pages 1105-1110]
  • Hosseinnezhad, Mozhgan The synthesis of two newdyes based on indoline and the investigation of their photovotalic properties [Volume 2, Issue 6, 2013, Pages 420-426]
  • Hosseinzadeh Yekani, Nima Landfill Leachate Treatment Using Nanostructured Polymeric Membrane in Adsorption Osmotic Membrane Bioreactor [Volume 8, Issue 31, 2020, Pages 2280-2287]

I

  • Imani, Amin Homogenous synthesis of hydrophilic silver nanoparticle by chemical reduction and surface modification by oleic acid [Volume 3, Issue 10, 2014, Pages 665-670]
  • Iravani, Nasir Synthesis and characterization of MWCNT/PEG@CD nanocomposite as carrier for sustained delivery of Acyclovir [Volume 5, Issue 20, 2017, Pages 1421-1428]

J

  • Jafari, Mostafa Preparation of Antistatic Organic-Inorganic Nanocomposite Coatings Based on Epoxy-Silane Containing ITO Nanoparticles [Volume 4, Issue 16, 2016, Pages 1119-1128]
  • Jafari, Seyed Hassan Flame-Retardant Advanced Materials based on Binary and Ternary Polymer Blends: Morphology, Thermal Stability and Flame Retardancy [Volume 11, Issue 44, 2024, Pages 3144-3152]
  • JAFARI, POUYA To what extent glass beads are important in road markings [Volume 10, Issue 37, 2021, Pages 2748-2756]
  • Jafarifard, Samaneh Investigation on the Co-Solvent Effect on the PEDOT:PSS Inkjet Ink Formulation Before and After Printing [Volume 5, Issue 17, 2016, Pages 1215-1222]
  • Jafari Khalafloo, Kioumars Investigating the effect of delamination on self-diagnostic behavior of carbon/CNT epoxy composites [Volume 11, Issue 44, 2024, Pages 3154-3168]
  • JAHAN BIGLARI, MARYAM Preparation and Characterization of Thermally Stable Nanofiber Based on Polyamide 66/ Poly (amide-imide) Blend [Volume 7, Issue 26, 2018, Pages 1871-1879]
  • Jahangiri, Shahrzad Synthesis of Nitro derivatives phenyl hydrazinocarbonyl acrylic acid and their use as corrosion inhibitor agent in temporary coatings [Volume 6, Issue 23, 2018, Pages 1669-1679]
  • Jahanshahi, Mohsen Modification of PES Polymeric Membrane by Oleic Acid for Membrane Distillation Process [Volume 8, Issue 31, 2020, Pages 2228-2238]
  • Jahanshahi, Mohsen Application of Ideal Adsorption Solution Theory (IAST) for Investigation of Separation of Carbon Dioxide / Nitrogen Gases on Nitrogen-doped Porous Carbon Synthesized from Nano-polyaniline [Volume 8, Issue 32, 2020, Pages 2288-2300]
  • Jahanshahi, Mohsen Landfill Leachate Treatment Using Nanostructured Polymeric Membrane in Adsorption Osmotic Membrane Bioreactor [Volume 8, Issue 31, 2020, Pages 2280-2287]
  • Jalali Sarvestani, Mohammad Reza interaction of Tetryl on the Surface of nanostructure of fullerene C24 [Volume 7, Issue 28, 2019, Pages 1974-1988]
  • Jalili, Kiyumars Mimicking mechanical properties of human tissues with 3D printable polyurethane-based elastomeric-hydrogels [Volume 11, Issue 41, 2023, Pages 3134-3142]
  • Jalili, Mojtaba Studying the effects of Rheological additives on the Rheological Properties of Offset Inks [Volume 4, Issue 14, 2015, Pages 999-1004]
  • Jamei, Saeed Performance Analysis of Nano Composites in Marine Structural Elements [Volume 11, Issue 41, 2023, Pages 3096-3111]
  • Jamshidi, Masoud Investigation of water-based binders (organic-inorganic) application on mechanical properties of photocatalytic pseudo-paints [Volume 5, Issue 20, 2017, Pages 1471-1480]
  • Jannesari, ali Influence of Zinc Content on Corrosion Resistance of Epoxy Polyester Hybrid Powder Coatings Systems [Volume 1, Issue 2, 2012, Pages 61-70]
  • Jannesari, Ali preparation and characterization of vinyl and methacrylate functionalized siloxane based oligomers [Volume 3, Issue 9, 2014, Pages 579-592]
  • Jannesari, Ali Investigation of the curing reaction of one-component polyurethane coating via thermal analysis and FTIR spectroscopy [Volume 1, Issue 1, 2012, Pages 63-74]
  • Jan Nesari, Ali Evaluation of anticratering agent based on Epoxy-Aminopropyltriethoxy silane-diethanol amine for cathodic electrocoating [Volume 3, Issue 11, 2015, Pages 787-795]
  • Javadpour, Jafar The Effect of Citrate on the Morphology of Hydroxyapatite particles through Hydrothermal Synthesis [Volume 7, Issue 27, 2019, Pages 1955-1962]

K

  • Kabir, Mojtaba Study of luminescent properties of Y2O3:Eu+3 nano particles synthesized by precipitation method in the presence of various surfactants [Volume 1, Issue 1, 2012, Pages 3-14]
  • Kalaee, Mohammadreza Evaluation of Effective Parameters on Rheological and Mechanical Properties of Automotive Plastisol Coatings Reinforced with Nano Silica Using Taguchi Method [Volume 7, Issue 27, 2019, Pages 1925-1936]
  • Kalaee, Mohammadreza Physical, Mechanical and Thermal Properties of Epoxy Coatings Modified with Nitrile-Butadiene Nano-rubber [Volume 7, Issue 28, 2019, Pages 2036-2047]
  • Kalaee, Mohammadreza Thermal stability and thermal degradation of epoxy nanocomposites in the presence of full vulcanized elastomeric nanoparticles [Volume 10, Issue 37, 2021, Pages 2758-2770]
  • Kalaee, Mohammadreza Evaluation of simultaneous presence of epoxy and polyester resins containing silica nanoparticles in the structure of foodstuff can coatings [Volume 10, Issue 39, 2022, Pages 2882-2897]
  • Kalaee, Mohammadreza Evaluation of rheological properties and shear strength of modified plastisol by nano-silica and nano-calcium carbonate using Taguchi method [Volume 10, Issue 40, 2022, Pages 2966-2977]
  • Kalaee, Mohammadreza Analysis the effect of different cross-linking agents on the structure of Starch-Poly (vinyl) alcohol nanofiber mats produced by electrospinning method [Volume 10, Issue 40, 2022, Pages 2978-2990]
  • Kalaee, Mohammad Reza Evaluation of Cerium conversion Coating Parameters on Strength and Adhesion Properties of Optimized Epoxy Adhesives containing Butadiene Elastomers and Graphene Oxide Particles [Volume 9, Issue 33, 2020, Pages 2434-2450]
  • Kalantari Pour, Maryam Synthesis of hydrogel nanocomposite based on graft copolymer of chitosan / itaconic acid and metal nanoparticles [Volume 10, Issue 38, 2021, Pages 2772-2779]
  • Karami, Bahador Tungstate sulfuric acid: a highly efficient catalyst in solvent-free multi-component reactions [Volume 10, Issue 40, 2022, Pages 2292-3002]
  • Karami, Mohammad Hossein Thermal stability and thermal degradation of epoxy nanocomposites in the presence of full vulcanized elastomeric nanoparticles [Volume 10, Issue 37, 2021, Pages 2758-2770]
  • Kardar, Pooneh Self-cleaning coatings based on titanium dioxide for Architectural Heritage [Volume 6, Issue 21, 2017, Pages 1525-1529]
  • Kardar, Pooneh synthesis of isophorene diisocyanate (core) - poly urethane (shell) microcapsules as non-catalyst healing agent in self-healing coatings [Volume 3, Issue 10, 2014, Pages 657-664]
  • Kardar, Pooneh Surface modification of AZ31 magnesium alloy to improve the corrosion resistance via eco-friendly conversion coatings based on praseodymium rare earth element [Volume 7, Issue 25, 2018, Pages 1781-1787]
  • Kardar, Pooneh Studying the anti-corrosive properties of a polyurethane coating on the AZ31 magnesium alloy via surface chemical modification by nano-conversion coatings based on praseodymium [Volume 6, Issue 24, 2018, Pages 1719-1726]
  • Kardar, Pooneh Study the self-healing properties of sol-gel coatings containing reversible tetra sulfide groups [Volume 8, Issue 32, 2020, Pages 2302-2308]
  • Karimi, Afzal Investigation and comparison of three alpha-cellulose extraction methods from Turkmen Sahra cotton waste [Volume 3, Issue 12, 2015, Pages 861-872]
  • Karimi, Meysam A novel nano multi MIP sensor for simultaneous detection of cTnT & HbA1c [Volume 8, Issue 30, 2019, Pages 2200-2210]
  • Kazemi, Sara The Role of zirconium additive in modifying Hydroxyapatite-based coating to increase the anti-corrosion performance for Mg implant applications [Volume 10, Issue 40, 2022, Pages 3018-3031]
  • Kazemi Najafi, Saeed Extracting and investigating the accuracy of granulation and molecular weight of lignin based biological polyols for the production of polyurethane coating [Volume 11, Issue 44, 2024, Pages 3206-3218]
  • Kazemzadeh, Hamid Synthesis and Characterization of a Cellulose Acetate Based PIM for Water Treatment [Volume 6, Issue 22, 2017, Pages 1619-1626]
  • Kazemzadeh, Hamid Facilitated Transport for Water Treatment through a CA-based Polymer Inclusion Membrane: Synthesis & Optimization [Volume 6, Issue 24, 2018, Pages 1727-1732]
  • Kebriaeie, GholamReza Investigation on the Co-Solvent Effect on the PEDOT:PSS Inkjet Ink Formulation Before and After Printing [Volume 5, Issue 17, 2016, Pages 1215-1222]
  • Keshavarz, Mosaddegh Synthesis and characterization of MWCNT/PEG@CD nanocomposite as carrier for sustained delivery of Acyclovir [Volume 5, Issue 20, 2017, Pages 1421-1428]
  • Keshavarz, Mosadegh Tungstate sulfuric acid: a highly efficient catalyst in solvent-free multi-component reactions [Volume 10, Issue 40, 2022, Pages 2292-3002]
  • Keshavarz, Mosadegh Synthesis of diaryloxindoles using a novel protic ionic liquid based on triazole [Volume 12, Issue 45, 2023, Pages 24-34]
  • Khajavi, Ramin Thermal stability and thermal degradation of epoxy nanocomposites in the presence of full vulcanized elastomeric nanoparticles [Volume 10, Issue 37, 2021, Pages 2758-2770]
  • Khajavi, Ramin Investigation of electrical, mechanical and thermal properties of silicone nanocomposites as electrical coating insulation [Volume 10, Issue 39, 2022, Pages 2934-2951]
  • Khajavi, Ramin Gelatin / Sodium Carboxymethylcellulose Hydrogel Microcapsules for Maximum Release of Lidocaine Hydrochloride [Volume 10, Issue 40, 2022, Pages 2952-2965]
  • Khajavi, Ramin Analysis the effect of different cross-linking agents on the structure of Starch-Poly (vinyl) alcohol nanofiber mats produced by electrospinning method [Volume 10, Issue 40, 2022, Pages 2978-2990]
  • Khalili, Soodabeh Application of Ideal Adsorption Solution Theory (IAST) for Investigation of Separation of Carbon Dioxide / Nitrogen Gases on Nitrogen-doped Porous Carbon Synthesized from Nano-polyaniline [Volume 8, Issue 32, 2020, Pages 2288-2300]
  • Khatirinezhad Fard, Hesam Fire resistant coating onsisted of potassium silicate binder [Volume 4, Issue 13, 2015, Pages 923-930]
  • Khavandi, Alireza The Effect of Citrate on the Morphology of Hydroxyapatite particles through Hydrothermal Synthesis [Volume 7, Issue 27, 2019, Pages 1955-1962]
  • Khayyeri, fateme Influence of Zinc Content on Corrosion Resistance of Epoxy Polyester Hybrid Powder Coatings Systems [Volume 1, Issue 2, 2012, Pages 61-70]
  • Khazaei, Masoud Synthesis of Porous Zirconium-based Metal-Organic Framework Nanostructure for Detoxification of Chemical Pollutants [Volume 9, Issue 34, 2020, Pages 2452-2460]
  • Khodabakhshi, Mohammad Fabrication and evalution of polyvinylidine fluride-barium sulfate composite coating for camouflage of target in snowy environments [Volume 3, Issue 11, 2015, Pages 753-762]
  • Khonakdar, Hossainali Effect of surface chemical treatment on carbon steel/epoxy coating delamination [Volume 1, Issue 1, 2012, Pages 35-40]
  • Khonakdar, Hosseinali The study of micro and nano glass flake effect on cure kinetik and anti-corrosion properties of epoxy vinyl ester composite coating [Volume 1, Issue 4, 2013, Pages 275-286]
  • Khorasani, Manouchehr Synthesis of Polymethylmetacrylate Containing of Silica Nanoparticles by Suspended in-situ Polymerization Used in Coating Industry [Volume 5, Issue 17, 2016, Pages 1187-1194]
  • Khorasani, Manouchehr The effect of different types of functional groups on the fluidity of the polycarboxylate superplasticizers in the presence of various cations [Volume 6, Issue 22, 2017, Pages 1605-1617]
  • Khorasani, Manouchehr Rheology and stability of Al-based nanocomposite suspention and efficiency of fluizized bed coating process [Volume 3, Issue 9, 2014, Pages 615-628]
  • Khorasani, Manouchehr Structural optimization and investigation of photophysical characteristics of Ag2Se nanoparticle [Volume 4, Issue 13, 2015, Pages 951-958]
  • Khorasani, Manouchehr Influence of Zinc Content on Corrosion Resistance of Epoxy Polyester Hybrid Powder Coatings Systems [Volume 1, Issue 2, 2012, Pages 61-70]
  • Khorasani, Manouchehr Evalution of various parameters in synthesis of PNS [Volume 7, Issue 28, 2019, Pages 1990-2001]
  • Khorasani, Manouchehr Study of the Sound Absorption Behavior and Cell walls Roughness of Flexible Polyurethane Foams [Volume 6, Issue 24, 2018, Pages 1733-1739]
  • Khorasani, Manouchehr Investigation on Synthesis and Applied Properties of Cellulose Acetate Butyrate Polymers (CAB) [Volume 9, Issue 33, 2020, Pages 2392-2399]
  • Khorasani, Manouchehr Synthesis and identification of water-reducible polyester resin curable with melamine resin and study of its anti-corrosive properties in compare with an imported commercial resin [Volume 10, Issue 37, 2021, Pages 2706-2716]
  • Khorasani, Manouchehr Synthesis and characterization of water-reducible polyester-acrylate used in automotive paint industry [Volume 9, Issue 36, 2021, Pages 2632-2643]
  • Khorsand, Hamid Rheology and stability of Al-based nanocomposite suspention and efficiency of fluizized bed coating process [Volume 3, Issue 9, 2014, Pages 615-628]
  • Khorsand, Hamid Effects of Temperature on Corrosion Resistance of NanoZirconia-Based Conversion Coating [Volume 3, Issue 12, 2015, Pages 831-840]
  • Khosravi, Alireza Kinetic study of ß-carotene degradation in nanostructured lipid carriers [Volume 8, Issue 29, 2019, Pages 2108-2115]
  • Kiani, Leila Facile synthesis and investigation of Co3O4-ZnO-Ag nanocomposites as efficient photocatalysts for decomposition of direct yellow dye [Volume 8, Issue 30, 2019, Pages 2166-2179]
  • Kiani, Sajad Evaluate the effect of Thiol-capping agent on optical properties of ZnS QDs synthesized at high temperature [Volume 4, Issue 16, 2016, Pages 1169-1178]
  • Kiani, Sajad Synthesis of ZnS quantum dots : the effect of thiol capping agent on photo physical and microstructural properties of nonoparticles [Volume 2, Issue 5, 2013, Pages 367-373]
  • Kiani, Sajjad Structural optimization and investigation of photophysical characteristics of Ag2Se nanoparticle [Volume 4, Issue 13, 2015, Pages 951-958]
  • Kiani, Sajjad The Effect of Zn2+ Enrichment on the Cobalt Chromite Spinel Pigments: Synthesis, Characterization, Colorimetric and NIR Reflectance Properties [Volume 4, Issue 14, 2015, Pages 975-982]
  • Kiyani, hamzeh Synthesis and investigation of photochoromic behavior of bicyclic aziridine based on calix pyrrole as an intelligent molecule [Volume 1, Issue 2, 2012, Pages 41-48]
  • Koochak, Farinaz Evaluation the effect of temperature on synthesis and optical properties of nano structured Sn-based perovskite with the as a sensitizer for solar cell application [Volume 5, Issue 19, 2017, Pages 1363-1370]
  • Koochakzaei, Alireza Assessment of heat stability of silicone oil and polyethylene glycol as lubricants of historic leathers [Volume 3, Issue 12, 2015, Pages 841-848]
  • Koupaei, Narjes Properties and applications of hydrogels in medicine: A review [Volume 8, Issue 29, 2019, Pages 2116-2128]

L

  • Lameie, Elnaz Fabrication and characterization of hemostatic wound dressing based on chitosan/tannic acid/zeolitic imidazole framework (ZIF-8) composite nanofibers [Volume 10, Issue 38, 2021, Pages 2806-2815]
  • Latifi, Masoud Enhancement of Hydrophilicity in Poly-lactic Glycolic Acid Electrospun Nanofibrous Web [Volume 5, Issue 20, 2017, Pages 1429-1437]
  • Latifi, Masoud Hybrid Pizo-Triboelectric Energy Nanogenerator from Woollen fabric and PVDF/BaTiO3 Nanofibrous Layer [Volume 9, Issue 34, 2020, Pages 2474-2481]

M

  • Maddah, Bozorgmehr Fire resistant coating onsisted of potassium silicate binder [Volume 4, Issue 13, 2015, Pages 923-930]
  • Maddah, Bozorgmehr Enhanced hydrogen sulfide adsorption of polyurethane nanofibrous membranes using carbon nanotubes decorated with metal oxide nanoparticles [Volume 8, Issue 30, 2019, Pages 2130-2138]
  • Maddah, Bozorgmelir Synthesis and Characterization of Polyacrylamideoxime and Its Nanofibers as Self-Decontamination Coatings [Volume 4, Issue 14, 2015, Pages 1015-1022]
  • Maghazeii, Farnaz The Study of Nanostructure and Magnetic Properties of Nanocomposites Barium/Strontium Hexaferrite Synthesized by Microwave Method [Volume 7, Issue 26, 2018, Pages 1859-1869]
  • Maghazeii, Farnaz The Study of Nanostructure, Magnetic Properties and Photocatalytic Behavior of Fe3O4/Ag Nanocomposites Synthesized by Microwave Method [Volume 9, Issue 34, 2020, Pages 2462-2473]
  • Maghsoodipoor, Amir Microwave-assisted Sintering of BaFe0.8Cu0.1Ni0.1O3-δ Composition for Use as Solid Oxide Fuel Cell Cathode [Volume 5, Issue 19, 2017, Pages 1347-1352]
  • Maghsudlurad, MohammadAli Prediction of elastic modulus of epoxy/single wall carbon nanotube composites by considering interfacial debonding [Volume 5, Issue 19, 2017, Pages 1371-1379]
  • Mahammad Ali Malek, reza Fabrication of Coaxial Electrospun Phase Change Cellulose Acetate/ Polyethylene Glycol Nanofibers toward Thermal Energy Storage [Volume 2, Issue 7, 2014, Pages 455-462]
  • Mahboubi, Fazad Effect of carbon nanotubes concentration on wear resistance of nickel-boron-carbon nanotubes coatings [Volume 7, Issue 27, 2019, Pages 1917-1924]
  • Mahdavain, M Effect of curing time on the protective performance of ecofriendly silane sol-gel coating on mild steel [Volume 6, Issue 22, 2017, Pages 1569-1576]
  • Mahdavi, Hossein Investigating the Effect of Cohesive FSS of the Base Textile and Multilayer Absorbant on Microwave Absorption Properties of Electromagnetic Absorption Coating [Volume 9, Issue 33, 2020, Pages 2408-2423]
  • Mahdavi, Reza Synthesis, Characterization and Investigation of ZnO/GO Nanocomposite Sonophotocatalytic Properties for Degradation of Rhodamine B Dye [Volume 9, Issue 35, 2021, Pages 2532-2544]
  • Mahdavian, Mohammad Effect of surface modification of Fe2O3 nanoparticles on the morphology... and mechanical properties of a polyurethane coating [Volume 3, Issue 11, 2015, Pages 733-741]
  • Mahdavian, Mohammad The Influence of nanosilver on thermal and antibacterial properties of a two component 100% solid polyurethane coating [Volume 1, Issue 4, 2013, Pages 245-252]
  • Mahdavian ahadi, Mohammad Synthesize, Characterization and Studying the Inhibitive Properties of Potassium Zinc Phosphate (PZP) Pigments [Volume 3, Issue 12, 2015, Pages 849-860]
  • Mahdavian Ahadi, mohammad Studying the corrosion resistance of an epoxy clay nanocoating using salt spray test and electrochemical impedance spectroscopy [Volume 1, Issue 2, 2012, Pages 3-12]
  • Mahdavian Ahadi, Mohammad Deposition of aminopropyl trimethoxy silane on galvanized steel to improve corrosion resistance [Volume 3, Issue 11, 2015, Pages 727-732]
  • Mahdavian Ahadi, Mohammad Synthesis and anticorrosion properties of lithium zinc phosphate pigment [Volume 1, Issue 1, 2012, Pages 27-34]
  • Mahdavian Ahadi, Mohammadi Synthesize, characterization and studying the inhibitive properties of potassium zinc phosphate pigment [Volume 4, Issue 13, 2015, Pages 901-910]
  • Mahmoodi, Nyazmohammad Comparison of suspension and catalytic-membrane photoreactors efficiency for elimination of the dyes [Volume 8, Issue 29, 2019, Pages 2092-2107]
  • Majidian, Hodsa Sintering of aluminum - zircon metal matrix composites [Volume 2, Issue 5, 2013, Pages 357-366]
  • Majidian, Houdsa Sintering of alumina-mullite-zirconia composites using microwave heating [Volume 3, Issue 10, 2014, Pages 711-722]
  • Majidian, Hudsa Evaluation of the rheological behavior of aqueous zirconia nanoparticles suspensions [Volume 7, Issue 26, 2018, Pages 1851-1857]
  • MakenAli, marzieh Investigation of Effective parameters on the Density of Vertically-Aligned Carbon Nanotubes Synthesized by CVD Method [Volume 2, Issue 7, 2014, Pages 463-473]
  • Malek, Majid Growth kinetic study of amorphous carbon thin film deposited by Ion Beam Sputtering deposition (IBSD) method using Avrami's model [Volume 9, Issue 36, 2021, Pages 2668-2676]
  • Maleki, Ali Study of resistance of applied mineral resin coating for stabilization of nanoparticles TiO2 to remove organic pollutants from waste water of paint and coating industries [Volume 6, Issue 24, 2018, Pages 1741-1746]
  • Maleki, Ali Synthesis and characterization of reduced graphene oxide with magnetized polyaniline for electromagnetic shielding [Volume 12, Issue 45, 2023, Pages 46-56]
  • Mallakpour, Shadpour Tungstate sulfuric acid: a highly efficient catalyst in solvent-free multi-component reactions [Volume 10, Issue 40, 2022, Pages 2292-3002]
  • Mamani, Arezoo Improving thermal, flame retardant and mechanical properties of epoxy resin via expandable graphite [Volume 2, Issue 6, 2013, Pages 410-419]
  • Marahel, F. Investigation and separation of high performance oil/water emulsion with a novel nanocomposite membrane [Volume 10, Issue 40, 2022, Pages 3004-3017]
  • Markhali, bijan Evaluation of corrosion inhibition of some Azole compounds on Austenitic stainless steel exposed to HCl [Volume 1, Issue 4, 2013, Pages 265-274]
  • Marzbanpour, Amir Hossein Comparison between the effects of microwave and conventional sintering on the microstructure and mechanical properties of metal-base Al-WC composites [Volume 4, Issue 15, 2016, Pages 1081-1086]
  • Mashkriz, Ali Preparation and investigation of mechanical properties of thermoplastic vulcanizate based on polypropylene/ polybutadiene rubber in the presence of acrylic acid modified polybutadiene compatibilizer [Volume 8, Issue 30, 2019, Pages 2187-2180]
  • Massah, Ahmadreza Synthesis and Electrical Conductivity Evaluation of Cross-linked Starch-Nanoclay Montmorillonite/Graphene Nanocomposite [Volume 9, Issue 34, 2020, Pages 2512-2518]
  • Masudi Farid, Mohammad Synthesizing of molecularly imprinted nanocomposites for using as diazinon sensor [Volume 6, Issue 21, 2017, Pages 1507-1514]
  • Mazaheri, Hossein Formation of Composite Layer Containing Silicon Carbide particles on the A106 Steel Surface by Tungsten Inert Gas (TIG) [Volume 4, Issue 14, 2015, Pages 1005-1014]
  • Mazaheri, Reza Improving the hydrophobic properties and mechanical abrasion of hybrid reinforced polyurethane coating with nanosilica-modified carbon nanotubes for use in gas pipelines [Volume 10, Issue 38, 2021, Pages 2780-2791]
  • Mehdi Nezhad Nori, Mohammad Synthesis of Porous Zirconium-based Metal-Organic Framework Nanostructure for Detoxification of Chemical Pollutants [Volume 9, Issue 34, 2020, Pages 2452-2460]
  • Mehdipour Mirmahale, Moein Evaluation of Carbon Nano Webs produced by Needleless and Conventional Electro-spun PAN-MWCNT Nanofibers Precursor [Volume 8, Issue 31, 2020, Pages 2212-2227]
  • Meidanchi, Alireza Comparison of Magnetic, Optical and Morphological Properties of the Nanocomposite of Reduced Graphene Oxide Coated with Zinc Ferrite Synthesized by One-Step Hydrothermal and Two-Step Sol-Gel / Hydrothermal Methods [Volume 9, Issue 33, 2020, Pages 2424-2433]
  • Merati, AliAkbar Enhancement of Hydrophilicity in Poly-lactic Glycolic Acid Electrospun Nanofibrous Web [Volume 5, Issue 20, 2017, Pages 1429-1437]
  • Mghsoudi, Akram Investigation of effective parameters in the formation of nanoporous and regular anodized aluminum oxide structures [Volume 6, Issue 21, 2017, Pages 1531-1541]
  • Mirabedini, Mojtaba Evaluation of thermoplastic road marking properties containing synthesized rosin ester [Volume 1, Issue 4, 2013, Pages 287-296]
  • Mirabi, Shiva Comparison of Magnetic, Optical and Morphological Properties of the Nanocomposite of Reduced Graphene Oxide Coated with Zinc Ferrite Synthesized by One-Step Hydrothermal and Two-Step Sol-Gel / Hydrothermal Methods [Volume 9, Issue 33, 2020, Pages 2424-2433]
  • Mirehi, S.Akram Synthesis and investigation of band energy variations in Pbs nanocrystallites via optical route [Volume 2, Issue 6, 2013, Pages 403-409]
  • Mirhoseini, Saber preparation, application and evaluation of properties of black polyurethane thermal control paint on 6016 alumium surface [Volume 3, Issue 10, 2014, Pages 687-700]
  • Mirhosseini, Saber Preparation, application and evaluation of properties of the black Silicon thermal control paint on 6061 aluminum surface [Volume 5, Issue 19, 2017, Pages 1331-1346]
  • Mirzaee, Majid Comparison between constant current electrochemical and pulse current approach in reduction of graphene oxide on nickel-nickel oxide foam [Volume 7, Issue 28, 2019, Pages 2002-2008]
  • Mirzaee, Majid Properties of MXene and its synthesis methods [Volume 12, Issue 45, 2023, Pages 1-22]
  • Mirzakhani, Mahdieh Molecular dynamics simulation of the effect of size, crystallite shape, and defect on oxygen diffusion in SrTiO3 [Volume 7, Issue 26, 2018, Pages 1843-1850]
  • Moeini, Alireza Carbon foam from Two step polymerization of Coal Tar Pitch : Synthesis and Characterization [Volume 2, Issue 5, 2013, Pages 325-336]
  • Moghadas, Shahab Microwave-assisted Sintering of BaFe0.8Cu0.1Ni0.1O3-δ Composition for Use as Solid Oxide Fuel Cell Cathode [Volume 5, Issue 19, 2017, Pages 1347-1352]
  • Mohaddes Mojtahedi, Mohammad Reza Crystallization behavior of polypropylene/graphene nanoplatelets nanocomposite fiber I. Isothermal crystallization kinetics [Volume 7, Issue 28, 2019, Pages 2022-2035]
  • Mohaddes Mojtahedi, Mohammad Reza Crystallization behavior of polypropylene/graphene nanoplatelets nanocomposite fibers II. Non-isothermal crystallization kinetics [Volume 8, Issue 30, 2019, Pages 2152-2165]
  • Mohammad Ali Malek, Reza Investigation graft polymerization of cyclodextrin derivative on the surface of cellulose by applying plasma technic [Volume 10, Issue 38, 2021, Pages 2816-2836]
  • Mohammadalitabar Khoshrodi, Adel Investigation of Morphology, Electrical and Electrochemical Properties of Gold Coating on Metallic Bipolar Plates of Fuel Cells [Volume 8, Issue 32, 2020, Pages 2334-2335]
  • Mohammad Hosseini, Reyhane The effect of solution pH on characteristics of Hexafluorozirconic acid based conversion coating for hot dip galvanized steel [Volume 2, Issue 6, 2013, Pages 395-402]
  • Mohammad Hosseini Toramuni, Sonia Synthesis of gold Nanoparticles: Influence of reducing agent on optical properties [Volume 12, Issue 45, 2023, Pages 36-44]
  • Mohammadi, Fereshteh Structural characterization and corrosion performance of acrylic/silica nanocomposite coatings [Volume 3, Issue 9, 2014, Pages 643-652]
  • Mohammadi, Fereydon Characterixation of Sol-Gel Deriveed Nanocomposite Coating of Ni+RuO2 [Volume 4, Issue 15, 2016, Pages 1031-1038]
  • Mohammadi, Fereydoun Preparation, Electrochemical Properties and Stability of Sol-Gel Deriveed Nano-Composite Coating of Ni+Ru02 [Volume 3, Issue 11, 2015, Pages 777-786]
  • Mohammadi, Fereydoun Nano-Composite Coating of Ni+RuO2 by Co-Elctrodeposition Part I : Preparation, Electrochemical Properties and Stability [Volume 1, Issue 2, 2012, Pages 49-60]
  • Mohammadi, Maryam Failure mechanisms and their finite element modeling of air plasma spray thermal barrier coatings: A review [Volume 7, Issue 27, 2019, Pages 1937-1953]
  • Mohammadi Achachluei, Mohsen Study of hindred amine light stabilizer and UV absorber treatments for conservation of white poplar wood agent weathering [Volume 4, Issue 13, 2015, Pages 889-900]
  • Mohammadi Achachluei, Mohsen Assessment of heat stability of silicone oil and polyethylene glycol as lubricants of historic leathers [Volume 3, Issue 12, 2015, Pages 841-848]
  • Mohammadipour nodoushan, Roya Studying the UV protection of the cotton fabric coated with MOF-derived C@ZnO and photocatalytic activity of synthesized nanoparticles [Volume 11, Issue 44, 2024, Pages 3196-3204]
  • Mohammadi Ziarani, Ghodsi Efficient removal of reactive black 5 dye by functionalized SBA-15 nonoporous adsorbent [Volume 2, Issue 5, 2013, Pages 337-348]
  • Mohammadpour, Raheleh Synthesis and characterization of CuSbS2 nanocrystals via hot injection route and investigation of sulfur precursor source [Volume 5, Issue 20, 2017, Pages 1415-1420]
  • Mohebbi, Tayyebeh Properties of MXene and its synthesis methods [Volume 12, Issue 45, 2023, Pages 1-22]
  • Mohseni, Mjid preparation and characterization of vinyl and methacrylate functionalized siloxane based oligomers [Volume 3, Issue 9, 2014, Pages 579-592]
  • Mohseni Bozorgi, Mohsen preparation and characterixation of perflourosilane treated nanosilica and investigation of effect of pH in treatment process [Volume 1, Issue 4, 2013, Pages 253-264]
  • Mohtashami, Sina Improving sound absorption behavior of flexible polyurethane foams infused with polymer nanofibers, carbon nanotubes and nanoparticles [Volume 8, Issue 29, 2019, Pages 2072-2080]
  • Mojtahedzadeh Larijani, Majid Growth kinetic study of amorphous carbon thin film deposited by Ion Beam Sputtering deposition (IBSD) method using Avrami's model [Volume 9, Issue 36, 2021, Pages 2668-2676]
  • Mokhtari, javad Preparation, characterization and optical properties of PVA/CdS nanocomposite thin films obtained by electrospinning method [Volume 2, Issue 6, 2013, Pages 386-379]
  • Mokhtari, Javad PHMB and Nano Silver As Novel Agents for Producing Antibacterial RegeneratedFibers from Silk Wastage [Volume 4, Issue 15, 2016, Pages 1051-1058]
  • Mokhtari, Javad The Effect of Inorganic Nanoparticles on Diffuse Reflectance Behavior of the Printed Cotton/Nylon Blend Fabric in Near Infrared and Short-Wave Infrared Spectral Ranges [Volume 8, Issue 30, 2019, Pages 2188-2198]
  • Mokhtari, Javad Application of Cactus on Textiles as a Shielding Agent against Electromagnetic Waves [Volume 10, Issue 39, 2022, Pages 2898-2907]
  • Mokhtari, Keivan A Review to the Effects of Cations Replacement on the Properties of Combined Spinels Based on Cobalt, Zinc and Magnesium [Volume 6, Issue 21, 2017, Pages 1489-1505]
  • Mola, Marie Optimization of Dye Extraction from Indigofera tinctoria & Dyeing Quality Evaluation [Volume 8, Issue 32, 2020, Pages 2320-2332]
  • Momeni, Mohamad Mohsen Preparation of tungsten-modified hematite-based photoconductors for photoelectrochemical cathodic protection of stainless steel [Volume 9, Issue 34, 2020, Pages 2482-2489]
  • Monazzam, Mohammad Reza Study of the physical, mechanical and sound absorbing properties of polyurethane and polymethyl methacrylate interpenetrating networks [Volume 6, Issue 23, 2018, Pages 1627-1634]
  • Montazeri, Shadi Investigation of the curing reaction of one-component polyurethane coating via thermal analysis and FTIR spectroscopy [Volume 1, Issue 1, 2012, Pages 63-74]
  • Moosakhani, Shima Evaluate the effect of Thiol-capping agent on optical properties of ZnS QDs synthesized at high temperature [Volume 4, Issue 16, 2016, Pages 1169-1178]
  • Moosakhani, Shima Evaluation the effect of temperature on synthesis and optical properties of nano structured Sn-based perovskite with the as a sensitizer for solar cell application [Volume 5, Issue 19, 2017, Pages 1363-1370]
  • Moosakhani, Shima Synthesis and characterization of CuSbS2 nanocrystals via hot injection route and investigation of sulfur precursor source [Volume 5, Issue 20, 2017, Pages 1415-1420]
  • Moosakhani, Shima Structural optimization and investigation of photophysical characteristics of Ag2Se nanoparticle [Volume 4, Issue 13, 2015, Pages 951-958]
  • Moosakhani, Shima The Effect of Zn2+ Enrichment on the Cobalt Chromite Spinel Pigments: Synthesis, Characterization, Colorimetric and NIR Reflectance Properties [Volume 4, Issue 14, 2015, Pages 975-982]
  • Moosakhani, Shima Synthesis of ZnS quantum dots : the effect of thiol capping agent on photo physical and microstructural properties of nonoparticles [Volume 2, Issue 5, 2013, Pages 367-373]
  • Moosavi Shooshtari, Ahmad Surface modification of polypropylen nonwoven with Acrylic acid using plasma treatment and evaluation of Basic dye removal properties [Volume 4, Issue 13, 2015, Pages 911-922]
  • Moqadas, shahab Synthesis and evaluation of photoluminescence properties of gelatin-coated PbS nanocrystals quantom dots for biomedical applications [Volume 1, Issue 4, 2013, Pages 237-244]
  • Moradi, Gholamreza Study of the physical, mechanical and sound absorbing properties of polyurethane and polymethyl methacrylate interpenetrating networks [Volume 6, Issue 23, 2018, Pages 1627-1634]
  • Moradi, Gholamreza Optimization of nano clay content on in-situ polymerization of polyurethane/polymethyl methacrylate interpenetrating network to study acoustic, thermal and mechanical properties of nanocomposites [Volume 6, Issue 24, 2018, Pages 1747-1754]
  • Moradi, Khosro Theoretical Evaluation of Hydroxyapatite: The Effect of Structural Modification on Mechanical Properties [Volume 6, Issue 24, 2018, Pages 1755-1761]
  • Moradi, Omid Isolation of Organic Contaminants (Dyes) Using Modified Surface Sodium Zeolite: Isotherm and Bleaching Kinetics [Volume 10, Issue 39, 2022, Pages 2908-2923]
  • Moradian, Siamak Study on photovoltaic properties of dye-sensitized solar cells based on indigo dyes in the presence of an anti-aggregation agent [Volume 4, Issue 16, 2016, Pages 1105-1110]
  • Moradian, Siamak The synthesis of two newdyes based on indoline and the investigation of their photovotalic properties [Volume 2, Issue 6, 2013, Pages 420-426]
  • Moradian, Siamak Synthesis of benzoxanthene-3,4-carboxilic anhydride and application in dye-sensitized solar cell [Volume 7, Issue 27, 2019, Pages 1887-1897]
  • Moradi dehaghi, Shahram Investigating the Effect of Cohesive FSS of the Base Textile and Multilayer Absorbant on Microwave Absorption Properties of Electromagnetic Absorption Coating [Volume 9, Issue 33, 2020, Pages 2408-2423]
  • Moridi Mahdieh, Zahra The assessment of photocatalytic properties of a synthesized TiO2/Ag nanocomposite particle loaded on polyester/cotton fabric via the discoloration of methylene blue [Volume 6, Issue 22, 2017, Pages 1587-1596]
  • Mortaji, Narges Study on the effect of photocatalytic benzene elimination reaction on the tensile strength of water-based acrylic paint [Volume 4, Issue 15, 2016, Pages 1059-1068]
  • Mosharafian, Masoumeh Synthesis and Electrical Conductivity Evaluation of Cross-linked Starch-Nanoclay Montmorillonite/Graphene Nanocomposite [Volume 9, Issue 34, 2020, Pages 2512-2518]
  • Moshayedi, Hamid Reza Design and manufacture of ethanol gas nanobiosensor based on the GO/PANI/SnO2 composite [Volume 7, Issue 26, 2018, Pages 1833-1842]
  • Moshayedi, Hamid Reza Design and manufacture multi nano biosensor for simultaneous detection of Carbon Dioxide, Methane, Ethanol and Ammonia gases [Volume 7, Issue 25, 2018, Pages 1799-1808]
  • Moshkriz, Ali Non-isothermal crystallization kinetics of thermoplastic vulcanizate based on polypropylene/ polybutadiene rubber in the presence of polybutadiene modified with acrylic acid as compatibilzer [Volume 8, Issue 31, 2020, Pages 2270-2278]
  • Mostaan, Hossein Evaluation of microstructure and mechanical properties of Al-Cr/Al2O3 claddings produced by GTAW process [Volume 8, Issue 29, 2019, Pages 2048-2059]
  • Motaghitalab, Vahid The Application of Carbon Fabric Coated with Polyaniline as a Sensitive Color Solar Cell Cathode [Volume 6, Issue 24, 2018, Pages 1703-1718]
  • Mottaghitalab, Fatemeh Evaluating the effect of albumin protein coating on corona composition of single walled carbon nanotubes [Volume 8, Issue 29, 2019, Pages 2060-2071]
  • Mousaei, Ahmad Investigating the effect of carbon nanotubes containing carboxyl and hydroxyl functional groups on the rheological properties of water-based drilling fluid [Volume 11, Issue 44, 2024, Pages 3182-3195]
  • Moztarzadeh, Fathollah Synthesis and evaluation of photoluminescence properties of gelatin-coated PbS nanocrystals quantom dots for biomedical applications [Volume 1, Issue 4, 2013, Pages 237-244]

N

  • Naderi, Reza Effect of curing time on the protective performance of ecofriendly silane sol-gel coating on mild steel [Volume 6, Issue 22, 2017, Pages 1569-1576]
  • Naderi, Reza Evaluation of the effect of aging time of silane solution and dipping duration on the anticorrosion properties of silane sol-gel coating applied on stainless steel 304L [Volume 4, Issue 13, 2015, Pages 931-942]
  • Nadipoor, Fatemeh Enhancement of Hydrophilicity in Poly-lactic Glycolic Acid Electrospun Nanofibrous Web [Volume 5, Issue 20, 2017, Pages 1429-1437]
  • Najafi, Farhood Synthesis and characterization polydimethyl siloxane/silica(PDMS/SiO2) hybrid acrylic copolymer as leveling agent for powder coatings [Volume 3, Issue 9, 2014, Pages 603-614]
  • Najafi, Farhood synthesis of isophorene diisocyanate (core) - poly urethane (shell) microcapsules as non-catalyst healing agent in self-healing coatings [Volume 3, Issue 10, 2014, Pages 657-664]
  • Najafi, Farhood Extracting and investigating the accuracy of granulation and molecular weight of lignin based biological polyols for the production of polyurethane coating [Volume 11, Issue 44, 2024, Pages 3206-3218]
  • Najafi, Farhoud Physical and Dyeing Properties of ellulosic fabric dyed by C.I. reactive dye Red 128 in the presence of Imidazoline Hydrochloride as an ionic liquid [Volume 5, Issue 17, 2016, Pages 1195-1204]
  • Najafi, Farhoud Study of luminescent properties of Y2O3:Eu+3 nano particles synthesized by precipitation method in the presence of various surfactants [Volume 1, Issue 1, 2012, Pages 3-14]
  • Najafi, Farhud synthesis and utilization of polysiloxane-polyether copolymer in car polish formulation [Volume 3, Issue 9, 2014, Pages 569-577]
  • Najafi, Farhud Synthesis of benzoxanthene-3,4-carboxilic anhydride and application in dye-sensitized solar cell [Volume 7, Issue 27, 2019, Pages 1887-1897]
  • Najafpour, Qasem Landfill Leachate Treatment Using Nanostructured Polymeric Membrane in Adsorption Osmotic Membrane Bioreactor [Volume 8, Issue 31, 2020, Pages 2280-2287]
  • Naseri, Mahmoud Investigation of the magnetic and structural properties of Zinc cobalt ferrite nanoparticles CoxZn1-xFe2O4 synthesized by thermal process [Volume 5, Issue 19, 2017, Pages 1389-1397]
  • Naseri, Mohammad Javad Preparation, application and evaluation of properties of the black Silicon thermal control paint on 6061 aluminum surface [Volume 5, Issue 19, 2017, Pages 1331-1346]
  • Naseri, Naimeh Ligand-Assisted Synthesis of Plasmonic Ag Nanowires: A Molecular Dynamics Study on Anisotropic Growth [Volume 6, Issue 23, 2018, Pages 1635-1640]
  • Naseri, Naimeh The effect of reduced graphene oxide on photo-catalytic degradation Rhodamine B [Volume 7, Issue 25, 2018, Pages 1773-1780]
  • Nasiri, Morteza Smart coatings based on poly(styrene-spiropyran) photo-responsive polymers [Volume 9, Issue 33, 2020, Pages 2400-2407]
  • Nasouri, Komeil Theoretical and Experimental Investigations of Nanofibers Formation on the Multiple Nozzle Electrospinning Process [Volume 3, Issue 12, 2015, Pages 799-808]
  • Nassiri, Parvin Study of the physical, mechanical and sound absorbing properties of polyurethane and polymethyl methacrylate interpenetrating networks [Volume 6, Issue 23, 2018, Pages 1627-1634]
  • Nazi, Malihe Investigation graft polymerization of cyclodextrin derivative on the surface of cellulose by applying plasma technic [Volume 10, Issue 38, 2021, Pages 2816-2836]
  • Nikbakht, Ali Investigating the effect of delamination on self-diagnostic behavior of carbon/CNT epoxy composites [Volume 11, Issue 44, 2024, Pages 3154-3168]
  • Nikbakht, Ali Fabrication of three-layer graded magnesium foam by means powder metallurgy and spacer method with an application in bioimplants: macro morphology, microstructure and compressive properties evaluation [Volume 11, Issue 44, 2024, Pages 3170-3181]
  • Nikpour, Saman Effect of curing time on the protective performance of ecofriendly silane sol-gel coating on mild steel [Volume 6, Issue 22, 2017, Pages 1569-1576]
  • Nikzad, E. Investigation and separation of high performance oil/water emulsion with a novel nanocomposite membrane [Volume 10, Issue 40, 2022, Pages 3004-3017]
  • Nikzad, Leila Evaluation of the rheological behavior of aqueous zirconia nanoparticles suspensions [Volume 7, Issue 26, 2018, Pages 1851-1857]
  • Nikzad, leyla Sintering of alumina-mullite-zirconia composites using microwave heating [Volume 3, Issue 10, 2014, Pages 711-722]
  • Noruziyan Kermani, Arghavan Effect of current density on microstructure and corrosion behavior of Co-P-nano-Al2O3 composite coating [Volume 8, Issue 31, 2020, Pages 2258-2268]
  • Nouri, Mahdi Preparation and study the structure of cellulosic nanofibers treated with β-cyclodextrin for gradual drug release [Volume 5, Issue 17, 2016, Pages 1205-1214]
  • Nouri, Mahdi Surface modification of silk fibers by activated carbon nanotubes [Volume 7, Issue 25, 2018, Pages 1763-1772]
  • Nouri, Masoud Electrochemical properties and Morphology evaluation of the Lanthanum based Conversion Coating on Cold rolled steel [Volume 4, Issue 14, 2015, Pages 965-974]
  • Nour Mohammadi, Farahnaz Functionalization and dispersion of graphene nano plates in resins [Volume 3, Issue 12, 2015, Pages 809-830]
  • Nourmohammadian, farahnaz One-pot synthesis of solvent-base self-colored acrylic polymers [Volume 2, Issue 7, 2014, Pages 474-479]
  • Nourmohammadian, Farahnaz Optical brigheners based on stilbenes : Synthesis , structure and functional groups effects on fluorescence emission [Volume 2, Issue 5, 2013, Pages 317-324]
  • Nourmohammadian, farhnaz Synthesis, Characterization and Investigation of Color Properties of Some New Cationic Dyes Based On Benzothiazole [Volume 1, Issue 2, 2012, Pages 71-80]

O

  • Oliaie, Hadi Evaluation of Cerium conversion Coating Parameters on Strength and Adhesion Properties of Optimized Epoxy Adhesives containing Butadiene Elastomers and Graphene Oxide Particles [Volume 9, Issue 33, 2020, Pages 2434-2450]
  • Olya, M.O Photocatalytic degradation of CI basic red 46 from aqueous solutions using SiO2/TiO2/Zeolite tertiary composites via advanced oxidation method [Volume 2, Issue 6, 2013, Pages 427-439]
  • Olya, Mohammad Ebrahim Effect of Ag dopped group on the dye removal efficiency of TiO2-Ag and ZnO-Ag nanophotocatalyst; a comparison study [Volume 4, Issue 15, 2016, Pages 1071-1080]
  • Olya, Mohammad Ebrahim The Influence of nanosilver on thermal and antibacterial properties of a two component 100% solid polyurethane coating [Volume 1, Issue 4, 2013, Pages 245-252]
  • Omidi, Mohammad Hasan Synthesizing of molecularly imprinted nanocomposites for using as diazinon sensor [Volume 6, Issue 21, 2017, Pages 1507-1514]
  • Oromiehie, Abdolrasul Evaluation of simultaneous presence of epoxy and polyester resins containing silica nanoparticles in the structure of foodstuff can coatings [Volume 10, Issue 39, 2022, Pages 2882-2897]

P

  • Pakdel, Amir Saeid Mechanism of particle formation, morphology and mechanical properties of hybrid and pure PMMA latexes prepared via Pickering and surfactant-free emulsion polymerization [Volume 4, Issue 15, 2016, Pages 1087-1096]
  • Pakizeh, Esmaeil Investigation of adsorption of copper, zinc and cadmium metals by polymeric coagulant polyaluminum chloride based on density functional theory [Volume 10, Issue 37, 2021, Pages 2740-2747]
  • Palimi, Mohammad Javad Effect of surface modification of Fe2O3 nanoparticles on the morphology... and mechanical properties of a polyurethane coating [Volume 3, Issue 11, 2015, Pages 733-741]
  • Panahi, Hanieh Prediction of Nano-Droplet Spreading on the Surface using the Multivariate Non-Linear Regression [Volume 7, Issue 26, 2018, Pages 1881-1886]
  • Parhami, Abolfath Synthesis and characterization of MWCNT/PEG@CD nanocomposite as carrier for sustained delivery of Acyclovir [Volume 5, Issue 20, 2017, Pages 1421-1428]
  • Parsamanesh, Massumeh The effect of synthetic silica particles, urethane resin and Fluorocarbon on the water/oil repellency of cotton [Volume 7, Issue 25, 2018, Pages 1815-1823]
  • Parsimehr, Hamid Reza Optimization of nano clay content on in-situ polymerization of polyurethane/polymethyl methacrylate interpenetrating network to study acoustic, thermal and mechanical properties of nanocomposites [Volume 6, Issue 24, 2018, Pages 1747-1754]
  • Pasandedeh, Mohammad Synthesis and investigation of band energy variations in Pbs nanocrystallites via optical route [Volume 2, Issue 6, 2013, Pages 403-409]
  • Payam, Ghasem Mimicking mechanical properties of human tissues with 3D printable polyurethane-based elastomeric-hydrogels [Volume 11, Issue 41, 2023, Pages 3134-3142]
  • Payami Golhinl, Ali Effects of Temperature on Corrosion Resistance of NanoZirconia-Based Conversion Coating [Volume 3, Issue 12, 2015, Pages 831-840]
  • Pazhouh, Samaneh Synthesis of Polymethylmetacrylate Containing of Silica Nanoparticles by Suspended in-situ Polymerization Used in Coating Industry [Volume 5, Issue 17, 2016, Pages 1187-1194]
  • Pazokifard, shahla Evaluation of Additive and Filler Effects on Water-based Traffic Nanocomposite Coatings [Volume 2, Issue 7, 2014, Pages 445-454]
  • Peyravi, Majid Modification of PES Polymeric Membrane by Oleic Acid for Membrane Distillation Process [Volume 8, Issue 31, 2020, Pages 2228-2238]
  • Peyravi, Majid Modification of PES Polymeric Membrane by Oleic Acid for Membrane Distillation Process [Volume 8, Issue 31, 2020, Pages 2228-2238]
  • Peyravi, Majid Landfill Leachate Treatment Using Nanostructured Polymeric Membrane in Adsorption Osmotic Membrane Bioreactor [Volume 8, Issue 31, 2020, Pages 2280-2287]
  • Pizzi, Antonio Extracting and investigating the accuracy of granulation and molecular weight of lignin based biological polyols for the production of polyurethane coating [Volume 11, Issue 44, 2024, Pages 3206-3218]
  • Pourjohari, Amir Hosein The effect of color component on readability of urban advertising [Volume 8, Issue 32, 2020, Pages 2358-2368]
  • Pourrajab Miandoab, Ali Smart coatings based on poly(styrene-spiropyran) photo-responsive polymers [Volume 9, Issue 33, 2020, Pages 2400-2407]
  • Poursalehi, Reza Investigation of luminescence and structural properties of oxyfluoride glass-ceramic doped with Cr2O3 and co-doping CeO2 [Volume 4, Issue 13, 2015, Pages 943-950]
  • Pourtahmasebi, Kambiz Study of hindred amine light stabilizer and UV absorber treatments for conservation of white poplar wood agent weathering [Volume 4, Issue 13, 2015, Pages 889-900]

Q

  • Qadami, Azam The study of micro and nano glass flake effect on cure kinetik and anti-corrosion properties of epoxy vinyl ester composite coating [Volume 1, Issue 4, 2013, Pages 275-286]

R

  • Rabiee, Mohammad Design and manufacture of ethanol gas nanobiosensor based on the GO/PANI/SnO2 composite [Volume 7, Issue 26, 2018, Pages 1833-1842]
  • Rabiee, Mohammad Design and manufacture multi nano biosensor for simultaneous detection of Carbon Dioxide, Methane, Ethanol and Ammonia gases [Volume 7, Issue 25, 2018, Pages 1799-1808]
  • Rabiee, Mohammad A novel nano multi MIP sensor for simultaneous detection of cTnT & HbA1c [Volume 8, Issue 30, 2019, Pages 2200-2210]
  • Raeisipour shirazi, armin Optimization of toughening of Polylactic Acid Nanocomposites/ Nanofibrillated Cellulose [Volume 7, Issue 25, 2018, Pages 1789-1798]
  • Raesi, Davod Effect of silicon carbide nanoparticles on the properties of polyurethane coatings applied on steel substrates [Volume 3, Issue 11, 2015, Pages 743-751]
  • Rafiaei, Fahimeh Evaluation of the effect of aging time of silane solution and dipping duration on the anticorrosion properties of silane sol-gel coating applied on stainless steel 304L [Volume 4, Issue 13, 2015, Pages 931-942]
  • Rafiei, Mahdi Evaluation of microstructure and mechanical properties of Al-Cr/Al2O3 claddings produced by GTAW process [Volume 8, Issue 29, 2019, Pages 2048-2059]
  • Rahimi Akhondzadeh, Fatemeh Investigation of the high temperature corrosion behavior of AISI 304 steel coated with Ni-Co-CeO2-ZrO2 composite [Volume 11, Issue 41, 2023, Pages 3084-3094]
  • Rajabi, Marjan Growth kinetic study of amorphous carbon thin film deposited by Ion Beam Sputtering deposition (IBSD) method using Avrami's model [Volume 9, Issue 36, 2021, Pages 2668-2676]
  • Rajaei Litkohi, Hajar Synthesis and investigation of the effect of precursor on hematite morphology using chemical vapor deposition layer for photoelectrochemical applications [Volume 10, Issue 39, 2022, Pages 2924-2933]
  • Ramezanzadeh, Bahram Effect of surface modification of Fe2O3 nanoparticles on the morphology... and mechanical properties of a polyurethane coating [Volume 3, Issue 11, 2015, Pages 733-741]
  • Ramezanzadeh, Bahram Synthesize, characterization and studying the inhibitive properties of potassium zinc phosphate pigment [Volume 4, Issue 13, 2015, Pages 901-910]
  • Ramezanzadeh, Bahram Synthesize, Characterization and Studying the Inhibitive Properties of Potassium Zinc Phosphate (PZP) Pigments [Volume 3, Issue 12, 2015, Pages 849-860]
  • Ranjbar, Mahdi Preparation of protective coating based on POSS- nanocage for space solar cells and evaluation of its stability in thermal cycling [Volume 4, Issue 16, 2016, Pages 1159-1168]
  • Ranjbar, Zahra Evaluation of anticorrosion properties of a thin cathodic electro-coating during exposure to salt spray chamber using electrochemical impedance spectroscopy [Volume 3, Issue 9, 2014, Pages 593-602]
  • Ranjbar, Zahra Deposition of aminopropyl trimethoxy silane on galvanized steel to improve corrosion resistance [Volume 3, Issue 11, 2015, Pages 727-732]
  • Ranjbar, Zahra Evaluation of anticratering agent based on Epoxy-Aminopropyltriethoxy silane-diethanol amine for cathodic electrocoating [Volume 3, Issue 11, 2015, Pages 787-795]
  • Ranjbar, Zahra Functionalization and dispersion of graphene nano plates in resins [Volume 3, Issue 12, 2015, Pages 809-830]
  • Ranjbar, Zahra Investigation of the curing reaction of one-component polyurethane coating via thermal analysis and FTIR spectroscopy [Volume 1, Issue 1, 2012, Pages 63-74]
  • Ranjbar, Zahra The effect of viscoelastic Parameters on the Protective performance of the Epoxy Coatings Using Creep-Recovery Modeling [Volume 9, Issue 35, 2021, Pages 2574-2588]
  • Rashidi, abousaeid Influence of Citric and Maleic Acid on Photo Catalytic Properties of Nano TiO2/Polysiloxane on Polyester fabric [Volume 2, Issue 7, 2014, Pages 496-508]
  • Rashvand, Masoumeh Functionalization and dispersion of graphene nano plates in resins [Volume 3, Issue 12, 2015, Pages 809-830]
  • Rasouli, Sousan Synthesis and characterization of gold–silica core-shell nanoparticles [Volume 10, Issue 38, 2021, Pages 2838-2846]
  • Rastegar, Saeed Evaluation of anticorrosion properties of a thin cathodic electro-coating during exposure to salt spray chamber using electrochemical impedance spectroscopy [Volume 3, Issue 9, 2014, Pages 593-602]
  • Rastegar, Saeed Investigation of the curing reaction of one-component polyurethane coating via thermal analysis and FTIR spectroscopy [Volume 1, Issue 1, 2012, Pages 63-74]
  • Razavi, Mansour Sintering of aluminum - zircon metal matrix composites [Volume 2, Issue 5, 2013, Pages 357-366]
  • Rezaei, Mohammad Synthesis of Porous Zirconium-based Metal-Organic Framework Nanostructure for Detoxification of Chemical Pollutants [Volume 9, Issue 34, 2020, Pages 2452-2460]
  • Rezaei, Mostafa Development of a new method to evaluate chain entanglements density in low entangled UHMWPE and UHMWPE/Graphene nanocomposites [Volume 5, Issue 20, 2017, Pages 1439-1447]
  • Rjabi Abhari, Abbas Comparison of suspension and catalytic-membrane photoreactors efficiency for elimination of the dyes [Volume 8, Issue 29, 2019, Pages 2092-2107]
  • Rohani, Shohreh Synthesis of a novel dye based N-allylnaphthalimide and investigation on its optical properties as fluorescent sensor and fluoride ion colorimetry [Volume 1, Issue 1, 2012, Pages 41-48]
  • Rohani, Sohrab Evaluation Of Effectiveness Of The Artificial Neural Network For Modeling The Cyanide Ions Adsorption From Aqueous Solution Using Zno@MOF-199 Nanoadsorbent [Volume 9, Issue 36, 2021, Pages 2656-2666]
  • Roshan, Shamim Synthesis of redox- responsive polyaniline microcapsules containing 8-hydroxyquinoline for corrosion protection of coatings. [Volume 9, Issue 34, 2020, Pages 2502-2511]
  • Rostami, Mehran Surface treatment of nanoalumina with aminosilane: the effect of silane concentration on the surface chemistry and performance of nanoalumina [Volume 4, Issue 16, 2016, Pages 1129-1146]
  • Rostami, Mehran Effect of surface modification of Fe2O3 nanoparticles on the morphology... and mechanical properties of a polyurethane coating [Volume 3, Issue 11, 2015, Pages 733-741]
  • Rostami, Mehran preparation and characterixation of perflourosilane treated nanosilica and investigation of effect of pH in treatment process [Volume 1, Issue 4, 2013, Pages 253-264]
  • Rouhani, Shohreh Functionalization and dispersion of graphene nano plates in resins [Volume 3, Issue 12, 2015, Pages 809-830]

S

  • Sabbagh alvani, Ali Asghar Evaluate the effect of Thiol-capping agent on optical properties of ZnS QDs synthesized at high temperature [Volume 4, Issue 16, 2016, Pages 1169-1178]
  • Sabbagh Alvani, Ali Asghar Evaluation the effect of temperature on synthesis and optical properties of nano structured Sn-based perovskite with the as a sensitizer for solar cell application [Volume 5, Issue 19, 2017, Pages 1363-1370]
  • Sabbagh Alvani, Ali Asghar Synthesis and characterization of CuSbS2 nanocrystals via hot injection route and investigation of sulfur precursor source [Volume 5, Issue 20, 2017, Pages 1415-1420]
  • Sabbagh Alvani, Ali Asghar Ligand-Assisted Synthesis of Plasmonic Ag Nanowires: A Molecular Dynamics Study on Anisotropic Growth [Volume 6, Issue 23, 2018, Pages 1635-1640]
  • Sabbagh Alvani, Ali Asghar Synthesis of leather fatliquoring agent with using castor oil/metallic organic frameworks (MOFs) via Pickering emulsion polymerization [Volume 6, Issue 21, 2017, Pages 1543-1549]
  • Sabbagh Alvani, Ali Asghar Structural optimization and investigation of photophysical characteristics of Ag2Se nanoparticle [Volume 4, Issue 13, 2015, Pages 951-958]
  • Sabbagh Alvani, Ali Asghar The Effect of Zn2+ Enrichment on the Cobalt Chromite Spinel Pigments: Synthesis, Characterization, Colorimetric and NIR Reflectance Properties [Volume 4, Issue 14, 2015, Pages 975-982]
  • Sabbagh Alvani, Ali Asghar Synthesis and Characterization of Mn-Doped ZnO quantum dots utilizable in optical biosensors [Volume 1, Issue 3, 2013, Pages 213-218]
  • Sabbagh Alvani, Ali Asghar The effect of reduced graphene oxide on photo-catalytic degradation Rhodamine B [Volume 7, Issue 25, 2018, Pages 1773-1780]
  • Sabbagh Alvani, Ali Asghar Theoretical Evaluation of Hydroxyapatite: The Effect of Structural Modification on Mechanical Properties [Volume 6, Issue 24, 2018, Pages 1755-1761]
  • Sabbagh Alvani, Ali Asghar Synthesis and Characterization of Fe-Based Metal-Organic Frameworks: MIL53 (Fe) for Methylene Blue Degradation [Volume 9, Issue 36, 2021, Pages 2668-2676]
  • Sabbagh Alvani, Ali Asghar To what extent glass beads are important in road markings [Volume 10, Issue 37, 2021, Pages 2748-2756]
  • Sabbagh Alvani, Ali Asghar Preparation of One-dimensional Reduced Titanium Dioxide; A Candidate for photocatalytic Applications [Volume 10, Issue 39, 2022, Pages 2872-2880]
  • Saberi Motlagh, Mahmood The Application of Carbon Fabric Coated with Polyaniline as a Sensitive Color Solar Cell Cathode [Volume 6, Issue 24, 2018, Pages 1703-1718]
  • Saber Samandari, Saeed Investigation of wear, hardness, microstructure properties and corrosion resistance of coated st52 steel by WC-Ni particles produced by tungsten -gas arc welding process [Volume 6, Issue 21, 2017, Pages 1475-1488]
  • Saber-Samandari, Sabersamandari Plasma sprayed nano-hydroxyapatite coatings on titanium alloys [Volume 5, Issue 20, 2017, Pages 1407-1413]
  • Saber-Samandari, Saeed Prediction of elastic modulus of epoxy/single wall carbon nanotube composites by considering interfacial debonding [Volume 5, Issue 19, 2017, Pages 1371-1379]
  • Sabzavar, Sara Mechanical Fragile Microcapsules: Effect of Yeon Remem on Corrosion Resistance Epoxy Coating [Volume 5, Issue 19, 2017, Pages 1353-1361]
  • Sadati, Zaynab Synthesis of Nitro derivatives phenyl hydrazinocarbonyl acrylic acid and their use as corrosion inhibitor agent in temporary coatings [Volume 6, Issue 23, 2018, Pages 1669-1679]
  • Sadeghi, Mohammad Synthesis and Electrical Conductivity Evaluation of Cross-linked Starch-Nanoclay Montmorillonite/Graphene Nanocomposite [Volume 9, Issue 34, 2020, Pages 2512-2518]
  • Sadeghi Kiakhani, Moosa studying of cotton fabric properties treated with prepared nanoparticles chitosan-poly(amidoamine) dendrimer (G=0.5) hybrid [Volume 3, Issue 10, 2014, Pages 701-710]
  • Sadeghi Kiakhani, Mousa Polyester fabric dyeing using synthesized 4-amino-9-metyoxypropyl naphthalimide-dendrimer hybrid [Volume 3, Issue 9, 2014, Pages 629-642]
  • Sadeghi-Kiakhani, Mousa Effect of poly(trimethylene terephthalate) on dyeing properties ofpoly(ethylene terephthalate)/poly(trimethylene terephthalate) blend fibers:Response Surface Methodology [Volume 4, Issue 15, 2016, Pages 1039-1050]
  • Sadeghi-Kiakhani, Mousa Application of poly(amidoamine) dendrimer as a retarding agent in acrylic dyeing with a basic dye [Volume 4, Issue 14, 2015, Pages 983-990]
  • Sadeghi-Kiakhani, Mousa Elimination of C.I. basic violet 16 from colored textile effluent using chitosan – ethyl acrylate as a bio – adsorbent [Volume 1, Issue 1, 2012, Pages 15-26]
  • Sadeghloo, fereshteh Influence of Zinc Content on Corrosion Resistance of Epoxy Polyester Hybrid Powder Coatings Systems [Volume 1, Issue 2, 2012, Pages 61-70]
  • Sadighi, Mojtaba Prediction of elastic modulus of epoxy/single wall carbon nanotube composites by considering interfacial debonding [Volume 5, Issue 19, 2017, Pages 1371-1379]
  • Sadough Vanini, Seyed Ali Investigating the effect of delamination on self-diagnostic behavior of carbon/CNT epoxy composites [Volume 11, Issue 44, 2024, Pages 3154-3168]
  • Sadredadras, Farahnaz synthesis of isophorene diisocyanate (core) - poly urethane (shell) microcapsules as non-catalyst healing agent in self-healing coatings [Volume 3, Issue 10, 2014, Pages 657-664]
  • Saebnori, Ehsan Corrosion resistance of polyaniline coatings formed by electropolymerization on titanium grade 2 [Volume 7, Issue 27, 2019, Pages 1899-1907]
  • Safa, Nima Improvement of Corrosion Resistance of Aluminum by Application of Alumina-Zirconia Nanocomposite Coating via Sol-Gel Method [Volume 4, Issue 16, 2016, Pages 1111-1118]
  • Safapour, Siyamak Effect of poly(trimethylene terephthalate) on dyeing properties ofpoly(ethylene terephthalate)/poly(trimethylene terephthalate) blend fibers:Response Surface Methodology [Volume 4, Issue 15, 2016, Pages 1039-1050]
  • Safapour, Siyamak The use of a fluorescent dye in the dyeing of wool fibers in carpet Naphthalimide [Volume 5, Issue 17, 2016, Pages 1243-1250]
  • Saffar-Teluri, A. Facile synthesis and investigation of Co3O4-ZnO-Ag nanocomposites as efficient photocatalysts for decomposition of direct yellow dye [Volume 8, Issue 30, 2019, Pages 2166-2179]
  • Safi, Mahdi Physical and Dyeing Properties of ellulosic fabric dyed by C.I. reactive dye Red 128 in the presence of Imidazoline Hydrochloride as an ionic liquid [Volume 5, Issue 17, 2016, Pages 1195-1204]
  • Saket, Mahsa Surface modification of AZ31 magnesium alloy to improve the corrosion resistance via eco-friendly conversion coatings based on praseodymium rare earth element [Volume 7, Issue 25, 2018, Pages 1781-1787]
  • Saket, Mahsa Studying the anti-corrosive properties of a polyurethane coating on the AZ31 magnesium alloy via surface chemical modification by nano-conversion coatings based on praseodymium [Volume 6, Issue 24, 2018, Pages 1719-1726]
  • Salarian, Reza A novel nano multi MIP sensor for simultaneous detection of cTnT & HbA1c [Volume 8, Issue 30, 2019, Pages 2200-2210]
  • Salehabadi, Mozhgan Production of polyester fibers with high thermal properties using Muscovite nanoparticles [Volume 11, Issue 41, 2023, Pages 3124-3133]
  • Salem, Amin Effect of calcination condition of nano-sized cobalt-aluminate pigment on glazing of ceramic body by transparent frit [Volume 1, Issue 1, 2012, Pages 49-62]
  • Salem, Shiva A Review to the Effects of Cations Replacement on the Properties of Combined Spinels Based on Cobalt, Zinc and Magnesium [Volume 6, Issue 21, 2017, Pages 1489-1505]
  • Salem, Shiva Effect of calcination condition of nano-sized cobalt-aluminate pigment on glazing of ceramic body by transparent frit [Volume 1, Issue 1, 2012, Pages 49-62]
  • Salimi, Reza Evaluate the effect of Thiol-capping agent on optical properties of ZnS QDs synthesized at high temperature [Volume 4, Issue 16, 2016, Pages 1169-1178]
  • Salimi, Reza Evaluation the effect of temperature on synthesis and optical properties of nano structured Sn-based perovskite with the as a sensitizer for solar cell application [Volume 5, Issue 19, 2017, Pages 1363-1370]
  • Salimi, Reza Ligand-Assisted Synthesis of Plasmonic Ag Nanowires: A Molecular Dynamics Study on Anisotropic Growth [Volume 6, Issue 23, 2018, Pages 1635-1640]
  • Salimi, Reza Structural optimization and investigation of photophysical characteristics of Ag2Se nanoparticle [Volume 4, Issue 13, 2015, Pages 951-958]
  • Salimi, Reza The Effect of Zn2+ Enrichment on the Cobalt Chromite Spinel Pigments: Synthesis, Characterization, Colorimetric and NIR Reflectance Properties [Volume 4, Issue 14, 2015, Pages 975-982]
  • Salimi, Reza Synthesis of ZnS quantum dots : the effect of thiol capping agent on photo physical and microstructural properties of nonoparticles [Volume 2, Issue 5, 2013, Pages 367-373]
  • Salimi, Reza The effect of reduced graphene oxide on photo-catalytic degradation Rhodamine B [Volume 7, Issue 25, 2018, Pages 1773-1780]
  • Salimi, Reza Synthesis and Characterization of Fe-Based Metal-Organic Frameworks: MIL53 (Fe) for Methylene Blue Degradation [Volume 9, Issue 36, 2021, Pages 2668-2676]
  • Salimi, Reza To what extent glass beads are important in road markings [Volume 10, Issue 37, 2021, Pages 2748-2756]
  • Salimi, Sina Influences of Inorganic Coatings on Corrosion Resistance of Invar Alloy [Volume 4, Issue 14, 2015, Pages 991-998]
  • Samadbin, Elham Investigation of luminescence and structural properties of oxyfluoride glass-ceramic doped with Cr2O3 and co-doping CeO2 [Volume 4, Issue 13, 2015, Pages 943-950]
  • Sameie, Hasan Evaluation the effect of temperature on synthesis and optical properties of nano structured Sn-based perovskite with the as a sensitizer for solar cell application [Volume 5, Issue 19, 2017, Pages 1363-1370]
  • Sameie, Hasan Structural optimization and investigation of photophysical characteristics of Ag2Se nanoparticle [Volume 4, Issue 13, 2015, Pages 951-958]
  • Sameie, Hasan Synthesis of ZnS quantum dots : the effect of thiol capping agent on photo physical and microstructural properties of nonoparticles [Volume 2, Issue 5, 2013, Pages 367-373]
  • Sameie, hassan Preparation of One-dimensional Reduced Titanium Dioxide; A Candidate for photocatalytic Applications [Volume 10, Issue 39, 2022, Pages 2872-2880]
  • Sameie, Hassan Evaluate the effect of Thiol-capping agent on optical properties of ZnS QDs synthesized at high temperature [Volume 4, Issue 16, 2016, Pages 1169-1178]
  • Sameie, Hassan The Effect of Zn2+ Enrichment on the Cobalt Chromite Spinel Pigments: Synthesis, Characterization, Colorimetric and NIR Reflectance Properties [Volume 4, Issue 14, 2015, Pages 975-982]
  • Sameie, Hassan The effect of reduced graphene oxide on photo-catalytic degradation Rhodamine B [Volume 7, Issue 25, 2018, Pages 1773-1780]
  • Sameie, Hassan Synthesis and Characterization of Fe-Based Metal-Organic Frameworks: MIL53 (Fe) for Methylene Blue Degradation [Volume 9, Issue 36, 2021, Pages 2668-2676]
  • Sameie, Hassan To what extent glass beads are important in road markings [Volume 10, Issue 37, 2021, Pages 2748-2756]
  • Samiee, mohsen Microstructural, Electrochemical and Biocompatibility Investigation of TiO2 Coating on AZ91D by magnetron sputtering method [Volume 8, Issue 31, 2020, Pages 2248-2257]
  • Sarabi, Ali Asghar The effect of different types of functional groups on the fluidity of the polycarboxylate superplasticizers in the presence of various cations [Volume 6, Issue 22, 2017, Pages 1605-1617]
  • Sarabi, Ali Asghar The effect of solution pH on characteristics of Hexafluorozirconic acid based conversion coating for hot dip galvanized steel [Volume 2, Issue 6, 2013, Pages 395-402]
  • Sarabi, Ali Asghar Electrochemical properties and Morphology evaluation of the Lanthanum based Conversion Coating on Cold rolled steel [Volume 4, Issue 14, 2015, Pages 965-974]
  • Sarabi, Ali Asghar The Study of Corrosion Resistance Behavior of Epoxy Nano Composite on Modified Steel using Conversion Coating Based on Hexa fluorozirconic Acid [Volume 2, Issue 7, 2014, Pages 480-489]
  • Sarabi, Ali Asghar Synthesizing of smart micro/ nanocapsules containing corrosion inhibitors: A study of the parameters affecting on the capsule size [Volume 8, Issue 31, 2020, Pages 2240-2247]
  • Sarabi, Ali Asghar Synthesis of redox- responsive polyaniline microcapsules containing 8-hydroxyquinoline for corrosion protection of coatings. [Volume 9, Issue 34, 2020, Pages 2502-2511]
  • Sarabi, Ali Asghar Synthesis and identification of water-reducible polyester resin curable with melamine resin and study of its anti-corrosive properties in compare with an imported commercial resin [Volume 10, Issue 37, 2021, Pages 2706-2716]
  • Sarabi, AliAsghar Mechanical Fragile Microcapsules: Effect of Yeon Remem on Corrosion Resistance Epoxy Coating [Volume 5, Issue 19, 2017, Pages 1353-1361]
  • Saranjam, Mohammad Ali Flame-Retardant Advanced Materials based on Binary and Ternary Polymer Blends: Morphology, Thermal Stability and Flame Retardancy [Volume 11, Issue 44, 2024, Pages 3144-3152]
  • Saraylo, Mohadese The effect of solution pH on characteristics of Hexafluorozirconic acid based conversion coating for hot dip galvanized steel [Volume 2, Issue 6, 2013, Pages 395-402]
  • Sardari, Azam Sadat Synthesis of leather fatliquoring agent with using castor oil/metallic organic frameworks (MOFs) via Pickering emulsion polymerization [Volume 6, Issue 21, 2017, Pages 1543-1549]
  • SbbaghAlvani, Ali asghar Synthesis of ZnS quantum dots : the effect of thiol capping agent on photo physical and microstructural properties of nonoparticles [Volume 2, Issue 5, 2013, Pages 367-373]
  • Sedighi, Majid Investigation of Morphology, Electrical and Electrochemical Properties of Gold Coating on Metallic Bipolar Plates of Fuel Cells [Volume 8, Issue 32, 2020, Pages 2334-2335]
  • Senobari, Navid Synthesis of benzoxanthene-3,4-carboxilic anhydride and application in dye-sensitized solar cell [Volume 7, Issue 27, 2019, Pages 1887-1897]
  • Seraj, Sanaz Evaluation of anticratering agent based on Epoxy-Aminopropyltriethoxy silane-diethanol amine for cathodic electrocoating [Volume 3, Issue 11, 2015, Pages 787-795]
  • Setare, Elham Effect of NiAl- (Cr2O3, TiO2) composite coating on oxidation resistance of HH heat resistant steel [Volume 7, Issue 27, 2019, Pages 1909-1915]
  • Seyed Dorraji, Mir Saeed An overview of the methods of synthesis, characterization and applications of MXene as a Microwave absorber [Volume 11, Issue 41, 2023, Pages 3048-3071]
  • Seyedraoufi, Zahra Sadat Microstructural, Electrochemical and Biocompatibility Investigation of TiO2 Coating on AZ91D by magnetron sputtering method [Volume 8, Issue 31, 2020, Pages 2248-2257]
  • SHABANIAN, MEYSAM Preparation and Characterization of Thermally Stable Nanofiber Based on Polyamide 66/ Poly (amide-imide) Blend [Volume 7, Issue 26, 2018, Pages 1871-1879]
  • Shademan, Atiyeh Application of Cactus on Textiles as a Shielding Agent against Electromagnetic Waves [Volume 10, Issue 39, 2022, Pages 2898-2907]
  • Shafiee Afarani, Mehdi Study of luminescent properties of Y2O3:Eu+3 nano particles synthesized by precipitation method in the presence of various surfactants [Volume 1, Issue 1, 2012, Pages 3-14]
  • Shafyei, Ali Characterization of WC-%XCo-%XCr coatings applied on stainless steel 316 by HP/HVOF and investigation the behavior of the coating in molten zinc bath [Volume 7, Issue 28, 2019, Pages 2010-2020]
  • Shafyei, Ali Influence of the Presence of Silver Nanowires on the hardness, tribological behavior and Corrosion Properties of Aluminum Anodizing coating [Volume 8, Issue 30, 2019, Pages 2140-2150]
  • Shafyei, Ali Investigation the Effect of Voltage on the Microstructure and Corrosion Behavior of 5083 Aluminum Alloy Anodizing Coating [Volume 10, Issue 37, 2021, Pages 2718-2729]
  • Shahriyarifar, Hossein Improving waterproof and breathability of nanofibrous polyurethane-poly(vinylidene fluoride) hybrid membrane [Volume 9, Issue 36, 2021, Pages 2622-2630]
  • Shariatinia, Zahra The assessment of photocatalytic properties of a synthesized TiO2/Ag nanocomposite particle loaded on polyester/cotton fabric via the discoloration of methylene blue [Volume 6, Issue 22, 2017, Pages 1587-1596]
  • SHARIATINIA, ZAHRA Studying the UV protection of the cotton fabric coated with MOF-derived C@ZnO and photocatalytic activity of synthesized nanoparticles [Volume 11, Issue 44, 2024, Pages 3196-3204]
  • Sharifi, Nafiseh Rapid and Easy Fabrication of Tryptophan Amino Acid Plasmonic Detection Kit [Volume 9, Issue 33, 2020, Pages 2370-2378]
  • Shayegani Akmal, Amir Abbas Investigation of electrical, mechanical and thermal properties of silicone nanocomposites as electrical coating insulation [Volume 10, Issue 39, 2022, Pages 2934-2951]
  • Sheibani, Hamidreza Making and investigating the effect of chemical pigments on the compressive, tensile, abrasion and water absorption resistance of colored concrete with an emphasis on urban beautification [Volume 10, Issue 40, 2022, Pages 3032-3047]
  • Shekarriz, Shahla The assessment of photocatalytic properties of a synthesized TiO2/Ag nanocomposite particle loaded on polyester/cotton fabric via the discoloration of methylene blue [Volume 6, Issue 22, 2017, Pages 1587-1596]
  • Shekarriz, Shahla The effect of synthetic silica particles, urethane resin and Fluorocarbon on the water/oil repellency of cotton [Volume 7, Issue 25, 2018, Pages 1815-1823]
  • Shekarriz, Shahla Studying the UV protection of the cotton fabric coated with MOF-derived C@ZnO and photocatalytic activity of synthesized nanoparticles [Volume 11, Issue 44, 2024, Pages 3196-3204]
  • Shishebor, Mehrdad Mathematical Model to determine the electrical resistivity characteristics of composite coatings based on conductive carbon black [Volume 5, Issue 17, 2016, Pages 1239-1242]
  • Shojaee Abari, Adel Investigation of wear, hardness, microstructure properties and corrosion resistance of coated st52 steel by WC-Ni particles produced by tungsten -gas arc welding process [Volume 6, Issue 21, 2017, Pages 1475-1488]
  • Shoja Razavi, Reza Preparation, application and evaluation of properties of the black Silicon thermal control paint on 6061 aluminum surface [Volume 5, Issue 19, 2017, Pages 1331-1346]
  • Shoja Razavi, Reza Effect of silicon carbide nanoparticles on the properties of polyurethane coatings applied on steel substrates [Volume 3, Issue 11, 2015, Pages 743-751]
  • Shoja Razavi, Reza preparation, application and evaluation of properties of black polyurethane thermal control paint on 6016 alumium surface [Volume 3, Issue 10, 2014, Pages 687-700]
  • Shoja Razavi, Reza Evaluation of Thermo-Optical Properties of Black Thermal Control Polyurethane Coating and the Effect of Atomic Oxygen on the Coating [Volume 3, Issue 11, 2015, Pages 763-776]
  • Shokrgozar, MohammadAli Synthesis of ZnS quantum dots : the effect of thiol capping agent on photo physical and microstructural properties of nonoparticles [Volume 2, Issue 5, 2013, Pages 367-373]
  • Shoushtari, Ahmad Theoretical and Experimental Investigations of Nanofibers Formation on the Multiple Nozzle Electrospinning Process [Volume 3, Issue 12, 2015, Pages 799-808]
  • Siadat, Seyedeh Ameneh PHMB and Nano Silver As Novel Agents for Producing Antibacterial RegeneratedFibers from Silk Wastage [Volume 4, Issue 15, 2016, Pages 1051-1058]
  • Siadat, Seyedeh Ameneh The Effect of Inorganic Nanoparticles on Diffuse Reflectance Behavior of the Printed Cotton/Nylon Blend Fabric in Near Infrared and Short-Wave Infrared Spectral Ranges [Volume 8, Issue 30, 2019, Pages 2188-2198]
  • Soleimani Gorgani, Atashe Investigation on the Co-Solvent Effect on the PEDOT:PSS Inkjet Ink Formulation Before and After Printing [Volume 5, Issue 17, 2016, Pages 1215-1222]
  • Soroushnia, Shaqayeq preparation and characterixation of perflourosilane treated nanosilica and investigation of effect of pH in treatment process [Volume 1, Issue 4, 2013, Pages 253-264]

T

  • Tabatabaee, Farzaneh The Effect of Zn2+ Enrichment on the Cobalt Chromite Spinel Pigments: Synthesis, Characterization, Colorimetric and NIR Reflectance Properties [Volume 4, Issue 14, 2015, Pages 975-982]
  • Tabatabaee, Farzaneh Synthesis of ZnS quantum dots : the effect of thiol capping agent on photo physical and microstructural properties of nonoparticles [Volume 2, Issue 5, 2013, Pages 367-373]
  • Taghavi, Mohammad Evaluation of rheological properties and shear strength of modified plastisol by nano-silica and nano-calcium carbonate using Taguchi method [Volume 10, Issue 40, 2022, Pages 2966-2977]
  • Taghvaei Ganjali, Saeed Investigation on Synthesis and Applied Properties of Cellulose Acetate Butyrate Polymers (CAB) [Volume 9, Issue 33, 2020, Pages 2392-2399]
  • Taheran, Mehrdad preparation, application and evaluation of properties of black polyurethane thermal control paint on 6016 alumium surface [Volume 3, Issue 10, 2014, Pages 687-700]
  • Taheri, Malihe Synthesis of redox- responsive polyaniline microcapsules containing 8-hydroxyquinoline for corrosion protection of coatings. [Volume 9, Issue 34, 2020, Pages 2502-2511]
  • Taherian, Mehrdad Evaluation of Thermo-Optical Properties of Black Thermal Control Polyurethane Coating and the Effect of Atomic Oxygen on the Coating [Volume 3, Issue 11, 2015, Pages 763-776]
  • Taherian, Mojdeh Evaluate the effect of Thiol-capping agent on optical properties of ZnS QDs synthesized at high temperature [Volume 4, Issue 16, 2016, Pages 1169-1178]
  • Taherian, Mojdeh Synthesis of ZnS quantum dots : the effect of thiol capping agent on photo physical and microstructural properties of nonoparticles [Volume 2, Issue 5, 2013, Pages 367-373]
  • Tahmasebi, Sara Using of Artemesia Absinthinum, Verbascum Thapsus, Viola Odorata, Matricaria Chamomilla and Corianderum Satirum natural dyes in making dye-sensitized solar cells [Volume 8, Issue 32, 2020, Pages 2346-2356]
  • Tahriri, M Synthesis and evaluation of photoluminescence properties of gelatin-coated PbS nanocrystals quantom dots for biomedical applications [Volume 1, Issue 4, 2013, Pages 237-244]
  • Tahriri, Mohammadreza A novel nano multi MIP sensor for simultaneous detection of cTnT & HbA1c [Volume 8, Issue 30, 2019, Pages 2200-2210]
  • Tajdar, Faride Air pollution remediation using nanofibrous filters based on metal-organic frameworks (MOFs) prepared through electrospinning [Volume 10, Issue 37, 2021, Pages 2690-2704]
  • Tajik Ijdani, Mohammad Synthesis and characterization of reduced graphene oxide with magnetized polyaniline for electromagnetic shielding [Volume 12, Issue 45, 2023, Pages 46-56]
  • Talebi, Saeed Development of a new method to evaluate chain entanglements density in low entangled UHMWPE and UHMWPE/Graphene nanocomposites [Volume 5, Issue 20, 2017, Pages 1439-1447]
  • Tasviri, Mahboubeh Investigation of photocatalytic efficiency of BiSI/BiOI/CNT composite for the Degradation of Malachite Green [Volume 9, Issue 35, 2021, Pages 2612-2621]
  • Tavakoli, Ali Investigating on coating morphology and chemical composition of AL-A380 and AL-B390 coated by anodic oxidation method [Volume 3, Issue 10, 2014, Pages 679-686]
  • Tavakoli, Mohammad Investigating on coating morphology and chemical composition of AL-A380 and AL-B390 coated by anodic oxidation method [Volume 3, Issue 10, 2014, Pages 679-686]
  • Tavakolian, Amirhossein Fabrication of three-layer graded magnesium foam by means powder metallurgy and spacer method with an application in bioimplants: macro morphology, microstructure and compressive properties evaluation [Volume 11, Issue 44, 2024, Pages 3170-3181]
  • Tavangar, Zahra Using of Artemesia Absinthinum, Verbascum Thapsus, Viola Odorata, Matricaria Chamomilla and Corianderum Satirum natural dyes in making dye-sensitized solar cells [Volume 8, Issue 32, 2020, Pages 2346-2356]
  • Teymouri, Mohammad Carbon foam from Two step polymerization of Coal Tar Pitch : Synthesis and Characterization [Volume 2, Issue 5, 2013, Pages 325-336]
  • Tirgar Bahnamiri, Ahmad Synthesis and investigation of the effect of precursor on hematite morphology using chemical vapor deposition layer for photoelectrochemical applications [Volume 10, Issue 39, 2022, Pages 2924-2933]
  • Towfighi Darian, Jafar Synthesis and Characterization of a Cellulose Acetate Based PIM for Water Treatment [Volume 6, Issue 22, 2017, Pages 1619-1626]
  • Towfighi Darian, Jafar Facilitated Transport for Water Treatment through a CA-based Polymer Inclusion Membrane: Synthesis & Optimization [Volume 6, Issue 24, 2018, Pages 1727-1732]

V

  • Valipouri, Afsaneh Fabrication of Polymeric Micro-Platelets via Electro-Centrifuge Spinning [Volume 6, Issue 21, 2017, Pages 1515-1524]
  • Vaziry, Alireza Mathematical Model to determine the electrical resistivity characteristics of composite coatings based on conductive carbon black [Volume 5, Issue 17, 2016, Pages 1239-1242]

Y

  • Yahyai, Hossein Impact strength increasing and toughening mechanism of epoxy resin [Volume 3, Issue 12, 2015, Pages 873-884]
  • Yavaripour, Alireza Enhanced hydrogen sulfide adsorption of polyurethane nanofibrous membranes using carbon nanotubes decorated with metal oxide nanoparticles [Volume 8, Issue 30, 2019, Pages 2130-2138]
  • Yazdani, Sepehr Effect of carbon nanotubes concentration on wear resistance of nickel-boron-carbon nanotubes coatings [Volume 7, Issue 27, 2019, Pages 1917-1924]
  • Yazdani Ahmad Abadi, Hosein Evaluation of anticorrosion properties of a thin cathodic electro-coating during exposure to salt spray chamber using electrochemical impedance spectroscopy [Volume 3, Issue 9, 2014, Pages 593-602]
  • Yazdani-Rad, Rahim Comparison between microwave and conventional heating on microstructure and final properties of Al- SiC- TiC [Volume 2, Issue 5, 2013, Pages 349-356]
  • Yeganeh, Hamid The Role of zirconium additive in modifying Hydroxyapatite-based coating to increase the anti-corrosion performance for Mg implant applications [Volume 10, Issue 40, 2022, Pages 3018-3031]
  • Yousefzadeh, Samira Fabrication of electrochemical sensor based on polyzincon nanolayer for dopamine detection [Volume 9, Issue 35, 2021, Pages 2520-2530]

Z

  • Zaarei, Davood Influences of Inorganic Coatings on Corrosion Resistance of Invar Alloy [Volume 4, Issue 14, 2015, Pages 991-998]
  • Zaarei, Davood Evaluation of the anti-corrosion effect of clay based nanopigments modified with organic azole compounds [Volume 6, Issue 23, 2018, Pages 1641-1654]
  • Zaarei, Davood Evaluation of Effective Parameters on Rheological and Mechanical Properties of Automotive Plastisol Coatings Reinforced with Nano Silica Using Taguchi Method [Volume 7, Issue 27, 2019, Pages 1925-1936]
  • Zaarei, Davood Self-Stratifying Metallic Coating Formulation Based on Polyurethane using Taguchi Experimental Design Method [Volume 9, Issue 34, 2020, Pages 2490-2500]
  • Zaarei, Davood Thermal stability and thermal degradation of epoxy nanocomposites in the presence of full vulcanized elastomeric nanoparticles [Volume 10, Issue 37, 2021, Pages 2758-2770]
  • Zaarei, Davood Evaluation of simultaneous presence of epoxy and polyester resins containing silica nanoparticles in the structure of foodstuff can coatings [Volume 10, Issue 39, 2022, Pages 2882-2897]
  • Zaarei, Davood Investigation of electrical, mechanical and thermal properties of silicone nanocomposites as electrical coating insulation [Volume 10, Issue 39, 2022, Pages 2934-2951]
  • Zaarei, davoud Evalution of Replacement of zinc by Micaceous iron oxide in zinc Rich Epoxy coatings and its effect on mechanical and chemical properties. [Volume 5, Issue 17, 2016, Pages 1123-1238]
  • Zakariaee, Fatemeh Homogenous synthesis of hydrophilic silver nanoparticle by chemical reduction and surface modification by oleic acid [Volume 3, Issue 10, 2014, Pages 665-670]
  • Zakerhaghighi, Kianoosh The effect of color component on readability of urban advertising [Volume 8, Issue 32, 2020, Pages 2358-2368]
  • Zali, Abbas Preparation of protective coating based on POSS- nanocage for space solar cells and evaluation of its stability in thermal cycling [Volume 4, Issue 16, 2016, Pages 1159-1168]
  • Zamani, Amir Performance Analysis of Nano Composites in Marine Structural Elements [Volume 11, Issue 41, 2023, Pages 3096-3111]
  • Zamani, Fatemeh Enhancement of Hydrophilicity in Poly-lactic Glycolic Acid Electrospun Nanofibrous Web [Volume 5, Issue 20, 2017, Pages 1429-1437]
  • Zamani, Fatemeh Production of Conductive Biocompatible Nanofibrous Substrate made of PLGA/PCL/PANI [Volume 6, Issue 22, 2017, Pages 1597-1603]
  • Zamani, Fatemeh Production of Conductive Nanofibrous Core–Shell Scaffolds to Regenerate Spinal Cord Injury [Volume 6, Issue 23, 2018, Pages 1681-1690]
  • Zaminy, Arash Production of Conductive Nanofibrous Core–Shell Scaffolds to Regenerate Spinal Cord Injury [Volume 6, Issue 23, 2018, Pages 1681-1690]
  • Zandrahimi, Morteza Effect of current density on microstructure and corrosion behavior of Co-P-nano-Al2O3 composite coating [Volume 8, Issue 31, 2020, Pages 2258-2268]
  • Zarei Ahmadi, Amanollah Synthesis and characterization of MWCNT/PEG@CD nanocomposite as carrier for sustained delivery of Acyclovir [Volume 5, Issue 20, 2017, Pages 1421-1428]
  • Zarei-Jelyani, Mohammad Electrochemical investigation of SEI layer in the formation process of natural graphite anode in Li-ion battery [Volume 7, Issue 26, 2018, Pages 1825-1832]
  • Zarinabadi, Ehsan Production of polyester fibers with high thermal properties using Muscovite nanoparticles [Volume 11, Issue 41, 2023, Pages 3124-3133]
  • Zerafati Shojaa, Fariba Evaluation of the rheological behavior of aqueous zirconia nanoparticles suspensions [Volume 7, Issue 26, 2018, Pages 1851-1857]